Customer Support
+34 972 661 661
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)

Mangrove CCTV Console MS-10

Manufacturer: Mangrove
Availability: in stock
The MS-10 is a multipurpose portable video system with the unique feature of having embedded batteries with an operating running time of up to 1 hour. It is equipped with a 10’’ monitor and a SD Card DVR recorder, you can record video without computer!

Price (exc. VAT) €822.31

Price (inc. VAT) €995.00

Shipping cost from €75.00
Calculate shipping cost

Add to Cart

Display console Mangrove MS-10

The MS-10 is a multipurpose portable video system with the unique feature of having embedded batteries with an operating running time of up to 1 hour. It is equipped with a 10’’ monitor and a SD Card DVR recorder, you can record video without computer!

The qualities of this 10-inch screen does not stop at the elegant design: the LED display is energy efficient while providing intense rendering of colors and ultra-sharp image. The image is clearly visible from any angle.


  • CCTV stand-alone and portable system
  • 10 "LCD Monitor
  • Monitors and records the signal from an analog video source AHD
  • Waterproof case IP67
  • Embedded batteries 12-1,28 Ah
  • Solid state recording via 2x SD memory cards (not included)
  • Compatible with leading cameras and spotlights on the market


  • Internal inspection of pipes
  • Tank and well inspections
  • Confined space inspections
  • Drop Camera
  • Underwater surveillance
  • Wet weather surveillance
  • Pre-dive inspections
  • Operator visuals for monitoring equipment and machinery

Stylish design

This extremely flat 10 inch monitor has an elegant black lacquer finishing. The buttons do not become visible until you run over them with your hand. The smooth design makes sure this 10 inch monitor fits perfectly into every space.

Stunning performances

The LED technology takes care of a clear and sharp image. The 10 inch monitor is equipped with a VGA input, 1 video input and 1 audio input and is also provided with an integrated speaker. This 10 inch monitor is suitable for a wide range of applications.


  • Diagonal size: 10.1" (25.7 cm)
  • Native resolution: 1024 x 600
  • Supported resolutions: 1920 x 1080 (max), 800x480 (min)
  • Pixels per inch: 117 PPI
  • Panel: LED
  • Brightness: 300cd/m2
  • Contrast: 300:1
  • Viewing angle: 110° horizontal, 80° vertical
  • System: PAL/NTSC/SECAM
  • Aspect ratio:16:9 (4:3 adjustable)
  • Power supply: 12 Volt
  • Connectors:
    • 1x VGA
    • 2x BNC
  • Colour: Black
  • Weight: 700 grams (without stand) 900 grams (with stand)
  • Monitor size: (WxHxD) 246 x 166 x 20 mm
  • Display dimensions: 218 x 132 mm
  • Audio: Built-in speaker
  • Power on function Monitor remembers last power-function and source (on/off)
  • Mirroring Image can be mirrored, horizontal and vertical
  • Image Colours, contrast and brightness are adjustable
  • Operation temperature: -10 C° to +65 C°


  • Resolution: 1080P/720P/D1
  • Recording format: H.264 Compressed
  • Video Output format: NTSC/PAL
  • Recording Function: Local storage/loop video recording/not loop video recording
  • Support (storage): Dual SD cards, support 64 GB (SD cards not included)
  • Menu settings: Operates with remote control
  • OSD data: Date and time
  • Video Input: 1 x BNC (1Vp-p 75Ω)
  • Audio Input: 1 x RCA, Line - In
  • Video Output: 1 x BNC
  • Audio Output: 1 x RCA, Line – Out
  • USB interface: connects with a computer to read SD card data
  • HDMI interface: supports 720P high resolution video out 


  • Inside Dimensions: 330 x 235 x 150 mm
  • Outside Dimensions: 365 x 295 x 170 mm
  • Weight: 3.5 kg
  • Watertight, crushproof, and dust proof
  • Solid wall design - strong, light weight
  • Overlapping/Superior Strength Interlocking Lid Design
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Stainless steel hardware


  • Power consumption: 2.5W
  • Powered by: Lithium-Ion battery pack 12 V - 1280 mAh 
  • Running time: +/- 1 hour
  • Battery capacity indicator: 5 LEDs
  • Battery charger: fast multi-voltage smart charger
  • Charging time: 2 hours
  • 10 inch LED monitor
  • DVR (SD cards not included)
  • Protective case
  • Remote control for monitor
  • Remote control for DVR
  • VGA cable
  • Battery charger
  • Manual
ADITECH provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 2 years from the date of purchase, with the following exceptions and conditions:
  • This warranty does not cover commercial or rental use.
  • Should your video housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Advanced Diving Technologies´ discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • All batteries and chargers are warranted by the original battery/charger manufacturer.
  • Lithium Ion battery packs are warranted for 6 months.
  • ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • ADITECH accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • ADITECH does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized ADITECH Dealer or ADITECH Service Department will void the warranty.
  • Each product is carefully examined and checked before it is shipped. It should therefore be visually and operationally checked as soon as it is received. If it is damaged in anyway, a claim should be filed with the courier and ADITECH notified of the damage.
  • By purchasing this product you agree and understand that in no event will ADITECH, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ADITECH is advised of such damages.

NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is caused by misuse, repair will be billed to the customer, and an estimate submitted for customer approval before the commencement of repairs

Do you have any doubts?