Mangrove LH-PS buy dive

Mangrove LH-PS

Manufacturer: Mangrove

Availability: Usually ships in 1 week

Light head compatible with Mangrove PS-3L3, PS-5L3, PS-10L3 technical dive lights, specially designed for wreck and cave diving, it is supplied with one Solid-State LED module array emitting a staggering 3500 lm. Sun-similar light with approx. 10° reflected beam angle and approx. 120 W (halogen).

Overview & Features
Technical Specifications
What´s Included
Compatible products
Warranty

Overview & Features

Technical Specifications

PERFORMANCE

Light Source: 3x LED
Luminous Flux (Lumen): 3500 lm
Beam angle (on air): 10º
Colour temperature: 5000º Kelvin
Colour rendering index (CRI): 85

ELECTRICAL

Power consumption: 3x 10W
Output levels: 100%

MECHANICAL

Depth rating: 160m/480 feet
Pressure Testing: seal integrity and operation validated
Body Material: Anodized 6082-T6 Alloy and Delrin
Output Window: 8mm tempered B270 glass
Umbilical cable length: 105 cm
Dimensions Light head:

Diameter head: 50mm
Length: 90mm

Weight: 770g (land) / 237g (water)

What´s Included

Light head LH-PS
Goodman handle

Warranty

Aditech provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 2 years from the date of purchase, with the following exceptions:

This warranty does not cover commercial or rental use.
Should your video housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Advanced Diving Technologies´ discretion, free of charge, excluding shipping and handling charges.
Repairs made under this warranty will not extend the warranty period
This warranty is non-transferable and applies to the original purchaser only.
All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
All batteries and chargers are warranted by the original battery/charger manufacturer.
Lithium Ion battery packs are warranted for 6 months.
Aditech will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
ADITECH accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
Aditech does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
This warranty specifically excludes bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions resulting from misuse and negligence.
This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
Modifications or repair by anyone other than an authorized ADITECH Dealer or ADITECH Service Department will void the warranty.
By purchasing this product you agree and understand that in no event will ADITECH, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ADITECH is advised of such damages.