Overview & Features
Mangrove Mini3000
Digital Lighting package for compact camera housings, it
comes with a Mini3000 video light, universal tray Mangrove SH-01-BJ, clamp and arm
adapter.
Mangrove Mini3000, amazing new strobe and video light with white,
red, and blue lights. We have packed a lot of features in to a
very compact
package this time around. To start we have a massive 3000 lumen of
white light at a
very wide and smooth 120 degree beam to cover all of your regular video
& photo lighting needs. To top it
off we included red, purple LED’s (420nm) to get you that
Ultra Violet effect! This will make the corals glow like you have never
seen before, definitely a show stopper! so this light will cover you no matter what you are shooting.
Awesome light for video, macro, UV photography and underwater photography in general!
KEY FEATURES
PRODUCT DETAILS
-
The ultra-compact Mini3000 is designed to be used as
backup or primary video lighting for any underwater video, digital still or digital
SLR system.
-
The Mini3000 is equipped with a module consisting of a COB LED of 16mm
white light (3000 lumen), 2 LEDS of red light, 2 LEDs of UV light
-
The red light is used not to scare underwater life and to get close to it.
-
Blue light is used to obtain fluorescence from underwater life.
-
A perfectly diffused 120 degree beam underwater provides
even coverage from macro to wide angle.
-
Near daylight 6500º Kelvin colour temperature
ensures the most true, natural tones especially when combined with ambient
light in seascapes.
-
The light head's powerful 3000 lumen beam (Turbo mode) may be
reduced to 1500 lumen to fine-tune exposure and extend
battery life.
-
The Mini3000 has a built-in a rechargeable Lithium-Ion battery pack of 7.4V 1500 mAh
-
The charging time is 2.5 hrs to reach 80% capacity
-
We have built in two mechanical push buttons
switchs to turn the light on-off, and cycle through the modes, the S1 button allows to turn
on the white video light in Turbo mode (3000 lumen), low power mode (1500 lumen), and
SOS mode (1500 lumen), the S2 button allows to turn on the red light, blue light (UV) and flash mode.
- In the strobe mode the Mini3000 emits 3000 lumen @ 1/125 sec
-
The heavy-duty and reliable mechanical switch is
within easy reach and features click-stops to indicate power setting by
feel.
-
The Mini3000 has been designed and manufactured using high quality components to withstand harsh environments.
-
The light has a threaded hole NC1/4 on the bottom that allows the
assembly of various fixing accessories, such as the 25mm ball-type coupling and the cold-shoe adaptor, both included with the Mini3000.
-
An
optional YS mount can also be mounted as well as a carry handle
-
Using a single battery lithium pack creates a very compact light weight package.
-
The maximum depth rating is 60 meters.
-
The LEDs do not have filaments or other parts subject to breakage or
failure due to "melting", their degradation is gradual throughout their
life.
-
The main advantage of the Mini3000 video light is its size, ideal for the current weight and size restrictions on flights
Technical Specifications
PERFORMANCE
- Light Source: 1x 16mm COB LED (white), 2x CREE XPE R2 (red), 2x Bleu (UV)
- Light Colors: white, red, blue
- Power consumption:
- White LEDs: 20 W
- Red LEDs: 2x 3 W
- Blue LEDs: 2x 3 W
- Luminous Flux (Lumen):
- White LEDs (@ 100%): 3000 lm
- White LEDs (@ 50): 1500 lm
- White LEDs (SOS mode): 1500 lm
- Beam angle: 120º
- Colour temperature: 6500º Kelvin
- Colour rendering index (CRI): 82
- Guide number (strobe mode): 20
ELECTRICAL
- Dimming (white): 100-50%
- Modes: 3x white flood, 1x red, 1x Bleu (UV)
- Switch: 2x mechanical push button
- Powered by: Li-ion rechargeable battery pack, 7.4 V-1500 mAh-11.1 Wh
- Burn time:
- White light @ 3000 lm (100%): 36 min
- White light @ 1500 lm (50%): 95 min
- White Light @ 1500 lm (SOS): < 3 h
- Red light: 5 h
- Blue Light: 5 h
- Cycle life at 23ºC: after 800 cycles +/- 70% available capacity
- Charging Input: Micro USB 2.0, DC 5V / 1A
- Charging time: < 3 h @ 80% capacity
MECHANICAL
- Depth rating: 60m/195 feet
- Pressure
Testing: seal
integrity and operation validated
- Body Material: Aluminum head, and body
- Treatment: anodized
- Output Window: 4mm clear PC
- Arm bracket: supplied with 25mm ball mount, cold-shoe adaptor
- Dimensions:
- Width: 46 mm
- Height: 52 mm
- Length: 55 mm
- Weight: 200g (land) / 95g (water)
What´s Included
- Video light Mini3000
- Light adapter with 25mm ball mount
- Cold shoe adaptor
- Battery charger USB cable
- Optical sync cord
- Spare O-Ring
- Battery charging compartment opening tool
- Breathable EVA case
- Protection bag
- User´s manual
- Tray SH-01-BJ
- Clamp C-BJ
Warranty
Aditech provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 2 years from the date of purchase, with the following exceptions:
- Lithium Ion battery packs are warranted for 90 days.
- This warranty does not cover commercial or rental use.
- Should your equipment prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at Advanced Diving
Technologies´ discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- All batteries and chargers are warranted by the original battery/charger manufacturer.
- Aditech will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Aditech does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes
bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ADITECH Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ADITECH, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ADITECH is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
