Overview & Features
Underwater Video Housing Recsea RVH-AX700 Pro
Compact, lightweight Recsea RVH-AX700 Pro housing compatible with
Sony FDR-AX700 and FDR-AX100 4K camcorders. Extremely durable and rugged
construction with full spec to 100m/328
feet depth rating, yet compact with fully functional ergonomic
controlability for various needs. Made from corrosion-resistant anodized
aluminum alloy und POM.
This housing features rugged aluminum construction yet only weighs 3.8kg. Small and light enough to hand carry on aircraft, it's the
perfect tool for the travelling diver faced with strict airline weight
restrictions. Because the housing body conforms so closely to
the camera, the housing attains nearly neutral buoyancy (slightly
negative) for effortless underwaterhandling handling.
FEATURES OF THIS HOUSING
- Full function and Durable, CNC precision machined corrosion-resistant Aluminum and POM (Polyoxymethylene) housing.
- Maximum Operating Depth (MOD) 100 meters (328 feet).
- Aluminum rotating IR Control Grip with complete Menu access.
- Electronic Leak Sensor. (Airlock Vacuum System w/Gauge and Pump Optional)
- LCD Window with adjustable LCD Mirror.
- INON 45° Viewfinder Unit compatible (No adapter required).
- M78 Lens Port.
- Bulkhead Port for external monitor.
- Three (3) M10 Ball Joint Sockets.
- Variety of supported RECSEA original options.
Technical Specifications
HOUSING SPECIFICATIONS
- Compatible Camera: SONY FDR-AX700 and FDR-AX100
- Depth Rating: 100 meters (328 feet)
- Main Body, Control Grip: Corrosion-resistant Aluminum Alloy
- Back Cover: POM
- Port Lens, LCD Window, Viewfinder: Hard Coat Acrylic
- Levers, Buttons, Dials: POM, PC
- Screws, Springs, Shafts: Stainless Steel, Galvanized / SUS
- Connector: EO Right Angle Female Bulkhead, 1 Socket 2 Contact,
- Dimensions: Approx. W230mm x D245mm x H167mm (Housing only)
- Weight Approx.: 3.757kg (Land ) / TBA kg (Freshwater w/AX700 & Optionai STG-05L2-VH AL Left Hand Single Grip & Tray Assembly)
- Standard Color: Black Alumite
MONITOR SPECIFICATIONS
- Maximum Depth: MOD: 100 meters (328 feet)
- Aspect Ratio: 16:9 480xRGBx272 Full Color TFT LCD
- Screen Size: 4.3 inch
- Power Supply: 4 AA batteries Approximately 5 hours dive time (Not Included)
- Material:
- Casing, Battery Cover: POM
- LCD Window: Hard Coat Acrylic
- Base: Corrosion-resistant Aluminum Alloy, Anodized
- Cable: 20,000 psi, 18 AWG/ 2 COND SJO
- Levers, Buttons, Dials: POM, PC
- Screws, Springs: Stainless Steel, Galvanized / SUS
- Dimensions: Approx. W124.25mm x D55.1mm x H94.45mm (Without Hood)
- Weight: Approx. 920g (Land / Monitor only) / 220g (Freshwater w/Hood, M10 Ball Joint, and Batteries)
WARRANTY
Two (2) years from purchase for general users, six (6) months for commercial or industrial users.
What´s Included
- Housing RVH-AX700 Pro
- RUWM-4.3iII Underwater Monitor w/EO connectors.
- Camera Tray
- Wrist Strap
- Housing Reserve O-ring
- O-ring Removal Pick
- O-ring
Grease
- User´s manual
Warranty
RECSEA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 2 years from the date of purchase, with the following exceptions:
- This warranty does not cover rental use.
- Six (6) months for commercial or industrial users
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at RECSEA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- RECSEA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- RECSEA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized RECSEA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will RECSEA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if RECSEA or ADITECH is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
