Overview & Features
Professional alumimium housing with the utmost high-tech compatible with Panasonic Lumix TZ6 and TZ7 It is equipped with full-function control buttons. The Acrylic back cover allows taking pictures and checking on the camera much easier. Its key hole lock design provides ease of use and added security to prevent from leaking. Now you can use small cameras with the feeling and function of professional camera housings
Technical Specifications
- It is equipped with full-function push buttons.
- Full-size screen.
- M67 female thread at front port allows to use the correction
filter CF-M67 as well as the Inon wide angle lens UWL-100 and the macro
lenses UCL-165 and UCL-330.
- 10 bar pressure tested
- Closure system: double O-rings, locking latches.
- Hard anodized aluminum body and port, acrylic back cover.
- Overal size: 130 x 80 x 60 mm (LxWxH)
- Weight: 836 g (housing only)
- Buoyancy (with camera): slightly negative in salt water
- Accessories:
- Sparemain O-rings (included)
- Dome port and extension adaptor (optional)
- Silicone O-ring grease (included)
- Carrying bag (included)
- Red filter (optional)
- Extension arm for strobe or video light (optional)
- Macro and Wide Angle lens (optional)
What´s Included
- Housing TZ7
- Spare main O-rings for housing body
- Universal tool
- O-ring remover
- Silicone O-ring grease
- 5 sponge applicator for silicone grease
- 1 lens cleanning tissue
- Nylon Lanyard
- Carrying bag
Warranty
10Bar provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
1 year from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at 10Bar´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- 10Bar nor Aditech will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- 10Bar accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- 10Bar does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized 10Bar Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will 10Bar, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if 10Bar or ADITECH is advised of such damages.