Overview & Features
UWEX 725 K
The UWEX® 725 K is a highly sensitive metal search instrument for underwater and normal land use. According to the detection job it can be operated in the short or in long version. It is pressure tested up to 60 m. The operation in saltwater will not cause interference to the function of the device!
The UWEX® 722C detects all type of metal including small parts of precious metals. The pressure waterproof headset gives a clear audible signal with large frequency deviation. Therefore it is easy to pinpoint the target.
Key Features
- Sensitive, versatile underwater detection system
- Modular design
- Various search heads
- Foldable large search head
- Detects ferrous and non ferrous metals
- Saltwater compatible
Product Details
EBINGER metal detectors represent trend-setting technology, reliability and prime quality in the field of underwater metal detection. The UWEX® 725 K represents the latest, most versatile underwater metal detection system. The search system can be offered in individual configurations to meet a wide range of customer needs in underwater search for objects with metal content.
The index K indicates the modular combination of different components in one set. The standard metal detector configuration can be enhanced with optional accessories not only to suit for the location minimum amounts of metal but also for deep search after UXO and large sized objects buried deep in the seabed.
All components are interchangeable between other detectors of the same kind. The large search heads expand the detection range on medium to large sized objects and supersede those of the standard detectors substantially.
The new UWEX® 725 K gives improved detection performance and a wide auto-adaptation to interfering metal components in the diving gear. The electronic circuitry can be tuned internally according to customer’s preference in detection of small or larger metal objects. Apart from the commercial version a military model is available and in service with NATO and NSN codified.
Mode of operation
The UWEX® 725 K operates, like other – active – UWEX® detectors, on the Pulse Induction Principle of the German engineer Claus Colani. EBINGER, in the possession of these patents, became the first manufacturer of PI detectors in Germany.
The UWEX® 725 K works by means of the Pulse Induction Principle (PI). The reading of interference due to conductive saltwater or ground is excluded. A selection of object size is possible. Local interference or unwanted signals from small metal scrap i.e. nails or short wires can be strongly reduced by tuning of internal adjusters. The advantages are apparently!
Technical Specifications
- Power supply: Battery 9 V E-Block IEC 6 LR61 or U9VL (Lithium)
- Operation time:
- Dry batteries:approx. 3 h
- Lithium: approx. 10 h
- Temperature range: approx. -20 °C to +60 °C
- Dimensions:
- Search head: Ø 230 mm
- Large head: Ø 800 mm
- Electronic cylinder: 40 x 535 mm
- Extension rod length: 580 x Ø 30 mm
- Length overall: 2.000 mm
- Weight: 1,8 kg
- Pressure test: 7 bar
What´s Included
- Search coil ø230 mm
- Device electronics
- Extension tube
- headphones
- 6 x Mignon AA 1.5 V (IEC: LR6)
- Device/transport bag
- Test plate
- User´s manual
Warranty
SECON provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for
1 year from the date of purchase, with the following exceptions and conditions:
- This warranty does not cover rental use.
- Should
your equipment prove to be defective for any reason (other than
those listed in the limitations section below) it will be repaired or
replaced at SECON´s discretion, free of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any
flood or damage, for any reason, that is caused from flooding an O-ring
sealed or water tight area will not be covered under warranty. All
O-ring sealed products undergo extensive factory pressure testing before
being shipped and delivered and are therefore guaranteed to be sealed
and functioning when shipped from the factory.
- SECON will not be liable for any loss, damages, or expenses including
incidental or consequential damages directly or indirectly arising from
the sale or use of the product.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- SECON does not warranty any product for
aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This
warranty does not apply and may be rendered completely void in the event
of accidental damage, abuse, overcharging of battery, flooding due to
neglect, tampering, lack of care and maintenance, improper storage, or
unauthorized service.
- This warranty specifically excludes cords, connectors, O-rings, fuses or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the product components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized SECON Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and ADITECH notified of the damage.
- By purchasing this product
you agree and understand that in no event will SECON, its
distributors or retailers, be held liable for any personal injuries
resulting from its operation, or any other damage whether direct,
indirect, incidental or consequential, even if SECON or ADITECH is advised of
such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
