Customer Support
+34 972 661 661
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€49.00
€69.00
Offer
-29%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%

AOI Macro Port FLP-07

Manufacturer: AOI
Availability: Usually ships in 3-4 days, on request only, no refunds
Share

AOI FLP-07 flat port made of plastic for Olympus OM-D mount housing (FLP-06 installed with AD-LP-01 adapter).

Price (exc. VAT) €214.05

Price (inc. VAT) €259.00

Shipping cost from €28.00
Calculate shipping cost

Add to Cart

AOI FLP-07 flat port made of plastic for Olympus OM-D mount housing (FLP-06 installed with AD-LP-01 adapter).

Bayonet-mounted, it has an optical glass front element which is multi-coated to reduce reflection for better image quality. The port body is constructed of plastic.

The new AOI underwater ports for the Olympus OM-D series housings allow you to expand your system with the addition of new lenses. With a 67mm threaded front, you can thread on M67 external close up lens and get even closer to the action.

It accommodates the followings lenses:
  • Olympus ED 14-42mm F3.5-5.6 EZ

Compatible with Olympus housings:

  • PT-EP08
  • PT-EP11
  • PT-EP14
  • PT-EP05
  • PT-EP05L
  • PT-EP06
  • PT-EP10
  • PT-EP13

MODEL

AOI FLP-07
DESCRIPTION Flat Port Plastic for Olympus OM-D Mount Housing (FLP-06 Installed w/AD-LP-01)
RECOMMENDED FOR

Camera Housings : Olympus Housing PT-EP08/11/14
(It can also be used in all Olympus PEN Mount Housing by taking away its
pre-installed OM-D Mount Adapter AD-LP-01)
Camera Lenses : Olympus ED 14-42mm F3.5-5.6 EZ/
*ED 60mm F2.8 Macro Lens
(* must add Extension Ring ER-PN_PN-34)

FRONT MOUNT M67
MATERIAL

Polycarbonate (PC) Barrel / Hard Anodized Aluminum
Optical Grade Flat Glass with Two Sides WR Coating and Multi-layers AR Coating

WATERPROOF 60 Meters
DIMENSIONS 111.5mm (D) X48.5mm (H)
WEIGHT 248 grams(Without Front Cover and Rear Cap)
ACCESSORIES ABS Front Cover (PFC-02) and PP Rear Port Cap (PRC-01)
  • Macro Port FLP-07
  • Neoprene cover
  • Rear cap
AOI provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at AOI´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • AOI nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • AOI accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • AOI does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized AOI Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will AOI, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if AOI or ADITECH is advised of such damages.

Do you have any doubts?