Overview & Features
Sea Frogs Housing for Canon EOS RP
Sea Frogs SF-EOSRP Underwater Housing for Canon EOS RP. Explore a whole new world of underwater photography with the new SF-EOSRP Underwater Housing, this case provides water resistance to depths of 40 metres, as well as protecting the camera from dust, dirt and damage, making it perfect for snorkelling or scuba diving.
Compatible Lenses
The
FP-M67x62 flat port is compatible with the following lenses:
- Canon RF 50mm F1.8 STM (only in autofocus mode)
The
FP-M67x91 flat port is compatible with the following lenses:
- Canon EF-S 60mm f/2.8 Macro USM (only in autofocus mode)
The
FP-D119x36 flat port is compatible with the following lenses:
- Canon RF 50mm F1.8 STM (only in autofocus mode)
The
FP-D127x91 flat port is compatible with the following lenses:
- Canon RF 35mm F1.8 IS Macro STM (only in autofocus mode)
- Canon RF 85mm F2 Macro IS STM (only in autofocus mode)
The
FP-D177x106 flat port is compatible with the following lenses:
- Canon EF-S 10-18mm f/4.5-5.6 IS STM (manual zoom gear not available)
- Canon RF 14-35mm f/4L IS USM (manual zoom gear included)
The FP-D177x151 flat port is compatible with the following lenses:
- Canon RF 15-35mm F2.8 L IS USM (manual zoom gear available)*
- Canon EF 16-35mm f/4L IS USM (manual zoom gear available)*
- Canon EF 16-35mm f/2.8L II USM (manual zoom gear available)*
- Canon EF 16-35mm f/2.8L III USM (manual zoom gear available)*
- Canon EF 24-70mm f/2.8 L II USM (manual zoom gear available, 24-55mm only)*
- Canon EF 24-105mm f/4L IS USM (manual zoom gear available)*
- Canon RF 24-105mm f/4L IS USM (manual zoom gear available)*
- Canon RF 50mm F1.8 STM (only in autofocus mode)
- Canon EF 85mm F1.4 L IS USM (only in autofocus mode)
- Canon EF 100mm f/2.8 Macro USM (only in autofocus mode)
- Canon EF 100mm f/2.8L Macro IS USM (manual focus gear available)*
The
WA005-A (polycarbonate dome)/
WA005-A-GL (optical glass dome) Ø150 mm dome ports or the
WA006-A (polycarbonate dome)/
WA006-A-GL (optical glass dome) Ø180 mm dome port are compatible with the following lenses:
- Canon RF 15-35mm F2.8 L IS USM (manual zoom gear available)*
- Canon EF 16-35mm f/4L IS USM (manual zoom gear available)*
- Canon EF 16-35mm f/2.8L II USM (manual zoom gear available)*
- Canon EF 16-35mm f/2.8L III USM (manual zoom gear available)*
- Canon EF 24mm F1.4 L II USM (only in autofocus mode)
- Canon EF 24-70mm f/2.8 L II USM (manual zoom gear available)*
- Canon EF 24-70mm f/4L IS USM (manual zoom gear available)*
- Canon EF 24-105mm f/4L IS USM (manual zoom gear available)*
- Canon RF 24-105mm f/4L IS USM (manual zoom gear available)*
The
WA005-F (polycarbonate dome)/
WA005-F-GL (optical glass dome) Ø150 mm dome ports or the
WA006-C (polycarbonate dome)/
WA006-C-GL Ø180 mm dome port are compatible with the following lenses:
- Canon EF 8-15mm f/4L Fisheye USM (manual zoom gear not available)
- Canon EF-S 10-22mm f/3.5-4.5 USM (manual zoom gear not available)
- Canon RF 14-35mm f/4L IS USM (manual zoom gear available)*
- Canon EF 17-40mm f/4L USM (manual zoom gear available)*
- Canon RF 24-105mm F4-7.1 IS STM (manual zoom gear not available)
* select optional zoom or focus ring from drop down options window when ordering
Housing Overview
The Sea Frogs housing is a black PC waterproof case for the Canon EOS RP camera. The case is depth rated to 130' (40 m). It features a camera quick shoe for easy mounting and removal of the camera. There are 2 fiber-optic cable sockets. When you connect the fiber-optic cable to the connector, the light of the digital camera's built-in flash is detected and connected to an external strobe to improve lighting quality.
Its easily operated shutter lever is excellent for taking quick snapshots. Push from the top or pull from the front to operate the lever. There's a smooth halfway press for adjusting the autofocus, so you need not worry about any missed chances.
Sea Frogs underwater camera housings are designed for those who are into underwater photography/videography. Just insert your digital camera in Sea Frogs UW case and you will be able to take beautiful pictures at depth up to 40 meters/130 feet. Sea Frogs products are reliable, as they are made of high-quality materials. Each housing is tested individually to prevent any accidents. Sea Frogs provides excellent quality for a reasonable price.
The primary application of this underwater housing is underwater photography/videography. However it can do a lot more by protecting your camera from weather hazards such as rain, dust, snow etc. Because of its compact size and near all functionality, it is an ideal item to have while traveling.
Main Features
- Housing molded of corrosion free clear polycarbonate, durable and resistance to corrosion
- The housing is rated to 40m/130ft depth, and is rugged and ready for use!
- Ergonomic design
- Clear view the camera information and control function
- Ensures that camera stays clean and dry
- Interchangeable lens port system
- The scratch-resistant glass lens port provides full use of the camera's zoom range without vignetting.
- Perfect in humid and wet conditions, salt spray, dust or snow, ideal for diving, surfing, snorkeling, skiing, yacht or other activities
- Port for vacuum test system: A threaded accessory port on the side of the housing is the perfect location for the installation of the optional vacuum leak check circuitry and valve. The Vacuum system allows you to pull a vacuum on the housing to simulate pressure at depth and check for leaks prior to entering the water.
- Provides mechanical controls for the main camera functions
- Each control on the housing is clearly labeled, making it easy to learn the system
- Large, easy to see buttons allow camera operation underwater, even with diving gloves
- A top accessory shoe is available for working with an optional external flash
- Dual Fiber optical direct plug-in
- Nikonos 3 pin bulkhead connector for external flash
- This housing features two 1/4-20 threaded tray mounts on the bottom of the housing for the attachment of a tray and handle system. Handles provide improved ergonomics underwater and are the foundation for your lighting mounts.
- Easy and secure installation of camera
- O-ring sealed with spring-loaded
- Easy open latch and drop in camera loading make set-up a breeze.
- The viewfinder has 1.5x magnification and a rubber hood to help block stray light for better visibility
- The Sea Frogs housing is offered as standard equipment with a built-in leak detector that will immediately activate a loud buzzer and a LED located at the rear of the housing in the event water should find its way past the o-ring seals, the water detector is located next to O-ring sealing and at the lowest point (in usual operating position) of the case
- Compatible with a wide range of underwater photo accessories
Technical Specifications
- Materials:
- Polycarbonate
- ABS plastic
- Optical glass
- Stainless steel
- EPDM rubber
- O-ring sealed buttons with spring loaded mechanism to protect your camera properly
- All function labels are pad printed to prevent peeling off or fading.
- Interchangeable lens port system
- Accurate ergonomic design and excellent
underwater balance
- Dual Fiber optical direct plug-in
- Nikonos 3 pin bulkhead connector
- Dimensions:
- Width: 206 mm
- Height: 181 mm
- Length: 277 mm
- Weight: Approx. 2.205 kg
- Depth rating: 40 meters
What´s Included
- Waterproof Case SF-EOSRP
- Leak detector
- Wrist landyard
- Neck strap
- Spare O-Ring seal (back door)
- Silicone grease
- Lens cleanning tissue
- 12x anti fog pads
- User manual
Warranty
Meikon provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for 1 year from the date of purchase, with the following exceptions and conditions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- Meikon/ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Meikon/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Meikon/ADITECH does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will Meikon/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs