Overview & Features
Isotta Housing for Nikon D780
An easy to use, highly professional product has been created through
techniques and innovations gained from years of experience. The perfect
handling of the Nikon D780 housing is possible by means of adjustable
handles crafted to match the human hand and make holding the camera very
comfortable even throughout long dives. Easy access to all key/main
camera controls by means of clearly labelled laser-engraved longlasting
buttons, even with gloves and drysuit gloves. An easy and quick release
camera mounting plate allows the camera positioning and a lever locks
the tray inside the housing. The back door has a large window
anti-scratch glass for a fine camera display and optical viewfinder view
and it is entirely detached from the front body to make easier the
camera fitting. External viewfinders can be mounted, INON X-2
compatible.
ONE HAND OPEN/CLOSE
The housing for Nikon D780 is
closed with Isotta’s single handed one-turn knob. It’s the only single
latch closing mechanism in the DSLR housing market. It’s fast, simple
and secure thanks to its double steel pins at the bottom of the housing.
PORTS AND EXTENSION RING
A series of ports and
extension rings are available in dedicated section. The removable port
is fitted thanks to markers and a bayonet 120 mm connection to the Nikon
D780. The interchangeable port bodies and extensions rings combine to
allow the use of most of lenses on the market for maximum versatility
and performance.
OPTIONAL TTL CONVERTER FLASH
The
housing for Nikon D780 can be supplied with a TTL Converter Electronics for Automatic
flash control. It also offers the possibility to use external strobes
via two standard optical light ports as well as two optional Nikonos
sync cord bulkheads. This allows for easy mounting of any strobe and
lighting set up.
CONSTRUCTION AND SAFETY
Only the best materials
are used to manufacture our housings such anodized aluminum which is
anticorodal and thermo-coated and stainless steel. A longlasting product
that requires easy and simple maintenance by the user. Dual
high-quality O-Ring seals protect and ensure a perfect and secure
watertight for all movable and / or removable parts; a red alarm for
humidity/water inside the housing is powered by a battery replaceable by
the user. Working depth is 100 metres. Different accessories can be
fitted by means of an M8 hole positioned on the upper side of the
housing and double threaded M6 holes located on housing bottom side.
Technical Specifications
- Signature red anodized aluminum body;
-
Ergonomic side handles, adjustable (via optional accessory);
- TTL converter electronics for automatic flash control included;
- Two fiber optic connectors;
- Two optional electrical sync cord bulkheads;
- Back housing completely detachable from the front housing;
- Tray with lock for an easy fitting of the camera;
-
Single-hand closing knob for back housing;
- One M16 hole for installation of accessories, e.g. vacuum valves or monitors;
-
Aluminum buttons and dials with engraved symbols identical to camera controls;
-
All camera controls are external;
-
Wide back display viewfinder glass;
-
Optical viewfinder;
- Double O-Ring seals on all buttons and removable parts;
- Moisture alarm with LED and an acoustic warning signal (replaceable battery);
- Removable port - 120mm bayonet;
- Ports security latch to prevent accidental opening;
- Wide, rubber covered feet for solid footing;
- M8 hole located on upper side of the housing for various accessories such as focus lights;
-
Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods;
- External viewfinders can be mounted, INON X-2 compatible;
- Depth rated to 100 metres;
- Weight: 2.700 grams;
- Size without handles: 220 W. x 130 D. x 193 H.
SPARE PARTS
- AS115 - Set O-Ring Nikon D850
- AS785 - Front cap
- AS089 - T socket
- GRASIL - Silicone grease
What´s Included
- Housing
- Front cap
- Replacement O-Ring kit
- Silicone Grease 10gr
- Standard handles
- 2 years manufacturer warranty
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
2 years from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.