Customer Support
+34 972 661 661
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€25.00
€57.00
Offer
-56%

INON UWL-95 C24 M52

Manufacturer: Inon
Availability: please, contact us
Share
Wet mount wide angle converter, dual use (land/underwater) wide conversion lens specially designed for 24mm wide camera (35mm film equivalent). The maximum view angle is 95° underwater for wide imaging and 159° on land for fish-eye imaging.Combination with optional super wide option Dome Lens Unit IIIA/Dome Lens Unit IIIG further increases view angle underwater up to 141° (*1).
Options

Price (exc. VAT) €398.35

Price (inc. VAT) €482.00

Shipping cost from €28.00
Calculate shipping cost

Add to Cart

UWL-95 C24 M52 Wide Angle Conversion Lens

Maximum view angle is 95° underwater/159° in air (*1). Combination with optional super wide option Dome Lens Unit IIIA/Dome Lens Unit IIIG further increases view angle underwater up to 141° (*1).

Totally renewed optical design effectively suppresses flare/ghost even in backlit condition to provide sharp and high quality image. The UWL-95 C24 is designed to support a camera of large 1.0 type sensor with bright master lens. Using the UWL-95 C24 can dramatically reduce minimum focusing distance enabling to get subject on the lens in focus both on land and underwater.

The lens mount is very versatile, M67 or M52 threaded mount. The M67 version has two types, either Type 1 or Type 2, having different threaded thickness to bring out optimal performance of different combined master lens. Optional M67 Type1 threaded ring or M67 Type2 threaded ring for UWL-95 C24 are available to purchase, making it easy to modify from M52 mount to M67 mount or convert original M67 type to the other type

As of April 2020, compatible camera system is:
  • UWL-95 C24 M67 Type1: Sony RX100M3, M4, M5, M5A/MPK-URX100A
  • UWL-95 C24 M52: Olympus TG-6/PT-059, TG-5/PT-058, TG-3,4/PT-056
(*1) Actual angle of view differs depending on camera/housing to use.
(*2) Depending on usage, original screw ring could be anchored due to salt build-up.  If you find any difficulties to remove original screw ring, do not proceed self modification and consult your purchasing dealer.
[UWL-95 C24 M52]
Outer diameter φ90.0 mm/3.5 in
Length 48.2 mm/1.9 in
Weight [air] 605 g/21.3 oz [underwater] approx.388 g/13.7 oz
Mount system INON M52 Mount
Depth rating 60 m/196.9 ft
Material Corrosion-resistant aluminum alloy
Surface finishing Rigid black alumite
Glass/Coating Optical glass/both side anti-reflection coating
Lens construction/magnification 3 groups 4 elements/0.63 (afocal)
Max. view angle (*1) [underwater] approx. 95°, [air] 159.0°
  • UWL-95 C24 M52 lens
  • Front lens cap
  • Rear lens cap
Inon provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Inon´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Inon nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Inon accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Inon does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Inon Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will Inon, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Inon or ADITECH is advised of such damages.

Do you have any doubts?