Customer Support
+34 972 661 661
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%

Dome Lens Unit III (for UWL-95 C24)

Manufacturer: Inon
Availability: in stock
Share
Extraordinary compact optional dome specifically designed to use with UWL-95 C24 wide conversion lens delivering underwater view angle approx. 141° when using with 1.0-type large sensor camera.
Options

Price (exc. VAT) €129.75

Price (inc. VAT) €157.00

Shipping cost from €28.00
Calculate shipping cost

Add to Cart

Dome Lens Unit III

Extraordinary compact optional dome specifically designed to use with UWL-95 C24 wide conversion lens delivering underwater view angle approx. 141° when using with 1.0-type large sensor camera.

Dome Lens Unit IIIA 

The Dome Lens Unit IIIA uses high transparency optical acrylic lens offering lightweight and competitive price.

Dome Lens Unit IIIG

The Dome Lens Unit IIIG uses multicoated optical glass lens offering high quality images in any shooting conditions.

Features

Both Dome Lens Unit IIIA/Dome Lens Unit IIIG have optical multicoated dome element which effectively suppresses flare/ghost even shooting in bright and clear water delivering sharp image with stable contrast. Installing this super wide option on the UWL-95 C24 increases underwater view angle up to approx. 141° and stretches focus range having minimum focusing distance of 0cm to get subject on the lens surface in focus. Superior ultra-wide dome lens suitable to use for wide variety of shooting conditions not only shooting wide seascape but wide macro imaging as well.

The Dome Lens Unit IIIA and the Dome Lens Unit IIIG use same lens barrel making it possible to install other dome material when necessary (like when replacing damaged original dome material).

The Dome Lens Unit IIIA/G has to be used with the UWL-95 C24 series lens underwater and not usable as standalone.
[Dome Lens Unit IIIA]
 
Outer diameter φ124.8 mm/4.9 in
Length 47.8 mm/1.9 in
Weight [air] approx. 272 g/9.6 oz
Compatible lens INON UWL-95 C24 series
Depth rating 60 m/196.9 ft
Material Corrosion-resistant aluminum alloy, PC etc.
Surface finishing Rigid black alumite
Glass/Coating Optical acrylic/anti-reflection coating (inner surface)
Max. view angle [underwater] (*3) Approx. 141°

 
[Dome Lens Unit IIIG]
Outer diameter φ124.8 mm/4.9 in
Length 47.8 mm/1.9 in
Weight [air] Approx.372 g/13.1oz
Compatible lens INON UWL-95 C24 series
Depth rating 60 m/196.9 ft
Material Corrosion-resistant aluminum alloy, PC etc.
Surface finishing Rigid black alumite
Glass/Coating Optical glass/anti-reflection coating (inner surface)
Max. view angle underwater (*3) Approx. 141°
Inon provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Inon´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Inon nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Inon accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Inon does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Inon Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will Inon, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Inon or ADITECH is advised of such damages.

Do you have any doubts?