Overview & Features
The new Isotta CC-Hero8 housing is compatible with the GoPro Hero8. The housing is depth rated to 200m, this housing is ideal for diving, snorkelling, and any underwater filming scenario. The Isotta housing features a large, optical flat lens that captures the sharp photos and video above and underwater in any resolution setting.
Ever since GoPro cameras first came on the market in 2004, sports
enthusiasts have been capturing incredible footage of surfing, hang
gliding, mountain biking, base jumping, and of course – scuba diving.
The nearly indestructible Isotta aluminium housing that contains the
camera is shockproof and waterproof to 200m/656 feet deep, and its low
cost and compact size, combined with HD video, is a great, affordable
choice for sports enthusiasts who want to film their adventures,
including divers.
PRODUCT DETAILS
Made with the same detail and robustness of Isotta DSLR housings the
GoPro Hero8 Black housing is a pro photographers tool for underwater
endeavours. Easy access to all key/main camera controls even with
gloves. The back door has a large window for a fine camera display view
and it is entirely detached from the front body; a rubber outline makes
simple the GoPro Hero8 Black camera fitting. A removable rear hood
provides an excellent view of the display in any condition.
ONE HAND OPEN/CLOSE
It's very easy to open and
close GoPro Hero8 Black, without efforts by the user thanks to the knob
and centered pins; camera is perfectly steady and safe.
PORT, CLOSE-UP AND WIDE-ANGLE LENSES
Front
portholes built with high quality standards of materials, ensure a
perfect image quality. The flat port of housing for GoPro Hero6 Black
has been created of the same size as the original so you can use most of
the accessories on the market.
CONSTRUCTION AND SAFETY
Only the best materials
are used to manufacture our housings such as anodized aluminum, which is
anticorodal and thermo-coated, and stainless steel. A longlasting
product that requires easy and simple maintenance by the user. Dual high
precision and quality O-Ring seals protect and ensure a perfect and
secure watertight for all movable and / or removable parts; a red alarm
for humidity/water inside the housing is powered by a battery
replaceable by the user. Working depth is 200 metres. An hole
positiioned on the housing bottom allows to attach the GoPro Hero8 Black
housing with a line/strap. Different accessories can be fitted using
the Isotta top handle or the M6 and 1/4W threaded holes on the bottom.
Technical Specifications
- Compatible Camera: GoPro HD Hero8
- Maximum Depth: 200 meters (656 feet)
- Material:
- Main Body & Back Cover: Corrosion-resistant aluminum alloy, anodized and POM
- Buttons: POM
- Port: POM
- Port Lens & LCD Monitor Window: Hard Coat Acrylic
- Screws, Springs: Stainless Steel, galvanized
- Dimensions: W110mm x D70mm x H80mm
- Weight: Approx. 200g (Land) / 150g (Freshwater/Camera with LCD BacPac)
- Controls:
• ON/OFF of GoPro Hero6 Black;
• Shutter button;
• Mode button;
What´s Included
- Housing Isotta CC-HERO8
- 1 x Spare O-Ring for Housing
- 1 x O-Ring Grease
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 2 years from the date of purchase, with the following exceptions:
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.
