Customer Support
+34 972 661 661
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%

Isotta RED64 Underwater Strobe

Manufacturer: Isotecnic
Availability: please, contact us
Share
Isotta’s  RED64 strobe features a thorough design, shielded electronics isolated from the control panel and a microprocessor with a software that can be upgraded guaranteeing a high quality performance in time. It is also neutrally buoyant in water and waterproof up to 100 meters. The strobe emits a wide and homogenous spread of light with no hot spot thanks to a xenon toroidal lamp and a warm color temperature of 5300 K essential for capturing bright colours underwater.

Price (exc. VAT) €1,479.34

Price (inc. VAT) €1,790.00

Shipping cost from €42.00
Calculate shipping cost

Add to Cart

Over 30 years after its first breakthrough flash, the Isomat 33, Isotta has returned to its roots with this brand new and powerful underwater strobe. Isotta is proud to announce the Isotta RED64 with guide number 64 in its signature red anodized aluminum finish and double O-rings.
Isotta’s RED64 was designed and produced in Italy as a result of 4 years of research and development in reverse engineering. It’s TTL protocol has been tested on all Nikon DSLR and an extensive test series on functionality and endurance and will soon be completed for all other relevant camera brands.

PRODUCT DETAILS

Isotta’s RED64 strobe features a thorough design, shielded electronics isolated from the control panel and a microprocessor with a software that can be upgraded guaranteeing a high-quality performance in time. It is also neutrally buoyant in water and waterproof up to 100 meters.

The strobe emits a wide and homogenous spread of light with no hot spot thanks to a xenon toroidal lamp and a warm color temperature of 5300 K essential for capturing bright colours underwater.

Being one of the most powerful strobes in the market it gives photographers the maximum light in every situation, illuminating details even in the darkest waters or against the light.

Isotta’s RED64 features a guide number (GN) 22 in water (at 1 meter of distance, ISO 100) allowing for a great power underwater and ideal to shoot against the sunlight and with big or distant subjects. Its beam angle of 130° degrees is achieved with its parabolic aluminum dish, spreading light without a diffusor and avoiding backscatter. The strobe has a two-color target light (white and red) from which to choose depending on the photographer’s needs.

Different to all other high-power strobes in the market the batteries section allows photographers to use their own 8 Ni-MH-AA rechargeable high-quality batteries, in a compartment sealed and separated from electronics. This not only allows for flexibility at location but also a big cost saving.

The RED64 Strobe is ergonomically designed with controls visible from every angle. A multi-color LED indicating activity and strobe readiness as well as battery status. The strobe can be controlled both automatically and manually: RED64 can be operated with an optical fiber cable working in TTL mode and as well in Manual. Alternatively, it can be used with sync cables through a S6 bulkhead or Nikonos V or in even in slave mode to work without cables.
  • 100 metres depth rating
  • Power 270 W
  • Easy one hand housing open/close
  • Multicolor Led
  • High precision and quality O-Ring seals
  • Guide Number: n° 22 in water / ISO 100
  • Beam angle 130°
  • Charge Time 3 sec 22 / 1 sec 11 / 0,1 sec 1
  • Flashes x Charge: 350 flashes with full power 22
  • Color Temperature 5.300° K
  • Manual Power Adjustment Non i-TTL / 10 Steps
  • Flash sockets 1x S6
  • Optical Fiber: yes
  • Servo Flash: yes
  • Modeling Light: white / red
  • Weight in Water: neutral
  • Weight outside: 1.250 gr (included batteries)
  • Other Features: 8 Rechargeable Batteries NiMH AA / Slave Function / Battery Test

Controls

  • 1st Selector OFF/Manual/TTL
  • 2nd Selector Manual Power comp. TTL
  • 1 Switch Pilot Light ON / White Light / Red Light
  • 1 MULTICOLOR LED:
    • GREEN (100% full battery)  
    • YELLOW (40%)
    • ORANGE (20%)
    • RED (3% low battery)
    • BLUE (TTL-C -> TTL-Syncro Cable)
    • LIGHT BLUE (TTL-F -> TTL-Fiber)
    • GREEN (M-C/F -> Manual-Cable or Fiber)
    • VIOLET (M-F -> Manual-Fiber with pre-Flash)
  • RED64 Strobe
  • User´s Manual
  • 2 years manufacturer warranty
ISOTTA provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 2 years from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • ISOTTA nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • ISOTTA accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Nauticam does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will ISOTTA, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ISOTTA or ADITECH is advised of such damages.
Do you have any doubts?