Overview & Features
The Isotta LX15 for the Panasonic Lumix DMC-LX15 end LX10 is an outstanding
example of the next generation of high-end housings for compact cameras.
With excellent fit and finish, rugged construction, and meticulous
attention to detail, all in a user friendly sized package, this is a
beautifully executed housing. Ergonomic command dials make this housing a
joy to use.
Easy access to all key/main camera controls by
means of clearly labelled laser-engraved longlasting buttons. An easy
and quick release camera mounting plate allows the camera positioning;
the back door has a large window for a fine camera display view and it
is entirely detached from the front body to make easier the camera
fitting.
ONE HAND OPEN/CLOSE
It's very easy to open and close Panasonic Lumix DMC-LX15,
without any efforts by the user thanks to the side helicoid screw and
the bottom centered pins; the camera is placed easily into the housing
on a sliding tray that keeps the camera robustly in place. A lever locks
the tray safely inside the housing. The housing stands with great
stability due to sturdy and wide rubber feet located on the bottom.
PORT, CLOSE-UP AND WIDE-ANGLE LENSES
Front
portholes are built with high quality standards of materials to ensure a
perfect image quality. A removable flat port is fitted thanks to
markers and a bayonet connection to Panasonic Lumix DMC-LX15 housing. A M67 threaded end allows the use of additional wet wide angle lenses and macro lenses.
STROBES
Panasonic Lumix DMC-LX15
own strobe lighting can be used fitting an outside diffuser on the
porthole. For better performance with wide angle lenses, one or two
external strobes can be connected by optical fiber using the adaptor
included.
CONSTRUCTION AND SAFETY
Only the best materials
are used to manufacture our housings such anodized aluminum which is
anticorodal and thermo-coated and stainless steel. A longlasting product
that requires easy and simple maintenance by the user. So small and so
rich in technology!
Dual high precision and quality O-Ring seals protect
and ensure a perfect and secure watertight for all movable and / or
removable parts; a red alarm for humidity/water inside the housing is
powered by a battery replaceable by the user.
Working depth is 100
metres.
An hole positioned on the bottom allows to secure the housing
for Panasonic Lumix DMC-LX15 with a line/strap.
Different accessories can be fitted by means of a threaded M8 hole on the top and
double threaded M6 holes plus one 1/4W on the bottom.
Technical Specifications
- 100 metres depth ratinG
- All Panasonic Lumix DMC-LX15 key main controls
- M16x1 hole for vacuum system or external monitor
- Easy one hand housing open/closE
- Moisture sensor
- Double high precision and quality O-Ring seals
- Weight: 770 gR
- Dimensions: 110 L. x 140 P. x 110 A.
CONTROLS
- ON/OFF of LX15
- Own camera strobe open/close
- Ergonomic camera focusing and shutter button for an easy use with gloves
- Shutter speed priority and all other button of the camera
- Lens aperture
SPARE PARTS
• AS127 - Set O-ring Panasonic Lumix DMC-LX15
• AS882 - Shutter Trigger Extension for Index Finger
• AS883 - Shutter Trigger Extension for Thumb Finger
• AS733 - Dual Fiber Optic Cable Adaptor
• AS833 - Round diffuser
• AS006 - M67 Cover
• AS046 - Tray with double handles
What´s Included
- Housing
- Lens cap
- Replacement O-Ring kit
- Silicone Grease 15gr / 0,5 oz
- Strobe diffuser
- Optical fiber adaptor
- 2 years manufacturer warranty
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 2 years from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.
