Overview & Features
The housing for Olympus Nikon Z7 & Z6 allows to capitalize on the
camera full potential and to capture amazing pictures underwater.
PRODUCT DETAILS
The durable anodized aluminum protects the camera from water and other
damaging elements and its stylish, compact and ergonomic design has been
specifically created for the breakthrough models of mirrorless Nikon Z7 and 6.
The perfect handling of the Isotta signature-red color Nikon Z7/6
housing is possible by means of adjustable handles crafted to match the
human hand and make holding the camera very comfortable even throughout
long dives. Easy access to all key/main camera controls by means of
clearly labelled laser-engraved longlasting buttons, even with gloves
and drysuit gloves. An quick release camera mounting plate allows the
camera positioning and a lever locks the tray inside the housing. The
back door has a large window anti-scratch glass for a fine camera
display and optical viewfinder view and it is entirely detached from the
front body to make easier the camera fitting. External viewfinders can
be mounted, INON X-2 compatible.
ONE HAND TO OPEN/CLOSE
The housing for Nikon Z7/6 is closed with Isotta’s
single handed one-turn knob. It’s the only single latch closing
mechanism in the DSLR housing market. It’s fast, simple and secure
thanks to its double steel pins at the bottom of the housing.
PORTS AND EXTENSION RING
A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Nikon Z7/6. The housing has been made on purpose to
fit the Nikon FTZ adapter, which does let you use Nikon F-mount lenses
on the Z7 – with varying degrees of compatibility. The interchangeable
port bodies and extensions rings combine to allow the use of most of
lenses on the market for maximum versatility and performance.
TTL CONVERTER TRIGGER INCLUDED
The housing for Nikon
Z7/6 features TTL Converter Electronics Trigger for Automatic flash
control. It also offers the possibility to use external strobes via two
standard optical light ports as well as two optional Nikonos sync cord
bulkheads. This allows for easy mounting of any strobe and lighting set
up.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such
anodized aluminum which is anticorodal and thermo-coated and stainless
steel. A longlasting product that requires easy and simple maintenance
by the user. Dual high-quality O-Ring seals protect and ensure a perfect
and secure watertight for all movable and / or removable parts; a red
alarm for humidity/water inside the housing is powered by a battery
replaceable by the user. Working depth is 100 metres. Different accessories can be fitted by means of one M8 hole positioned on the upper side of the housing and two
threaded M6 holes located on housing bottom side. Three M16x1 threaded
holes can be used for different needs such as to accomodate a vacuum.
CONTROLS
• ON/OFF of Nikon Z7 and 6
• Ergonomic camera focusing and shutter button for an easy use with gloves
• Lens release
• Rear control panel
• Upper control panel
• All controls are available on the housing
Technical Specifications
• Red color anodized aluminum body;
• Ergonomic side handles, adjustable (optional accessory);
• Two fiber optic connections;
• Two optional electrical sync cord bulkheads;
• Back housing completely detachable from the front housing;
• Dedicated REC lever and ISO button;
• Tray with lock for an easy fitting of the camera;
• Single-hand closing knob for back housing;
• Three M16 hole for installation of accessories, e.g. vacuum valves or monitors;
• Aluminum buttons and dials with engraved symbols identical to camera controls;
• All camera controls are external;
• Wide back display viewfinder glass;
• Optical viewfinder;
• Double O-Ring seals on all buttons and removable parts;
• Moisture alarm with LED and an acoustic warning signal (replaceable battery);
• Removable port - 120mm bayonet;
• Ports security latch to prevent accidental opening;
• Wide, rubber covered feet for solid footing;
• One M8 hole located on upper side of the housing for various accessories such as focus lights;
• Two M6 holes located on housing bottom side for different accessories such as brackets for strobes or tripods;
• External viewfinders can be mounted, INON X-2 compatible;
• Depth rated to 100 metres;
•
Weight: 2100 grams (with handles);
•
Size in mm: 200 W. x 117 D. x 173 H
What´s Included
- Housing Nikon Z7
- Front lid
- Handles
- Replacement O-Ring kit
- Silicone Grease 10gr
- 2 years manufacturer warranty
AS788 - Extension Ring with ZOOM mechanism for Nikon Z7 and Z6 is not included.
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
2 years from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.
