Customer Support
+34 972 661 661
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%

INON Straight Viewfinder (STVF-II)

Manufacturer: Inon
Availability: in stock
Share
New INON Straight Viewfinder Unit II STVF-II designed for FULL frame DSLR system to provide easy and comfortable focusing underwater, compatible with INON X-2 series housings and its optional Diopter Correction Lens. 

 

Options

Price (exc. VAT) €616.53

Price (inc. VAT) €746.00

Shipping cost from €28.00
Calculate shipping cost

Add to Cart

New INON Straight Viewfinder Unit II STVF-II designed for FULL frame DSLR system to provide easy and comfortable focusing underwater, compatible with INON X-2 series housings and its optional Diopter Correction Lens. 

The magnification ratio is 1.2x without sacrificing the field of view. As the viewfinder 1.2x is straight finder, you can compose your images as if you are looking directly through the camera’s viewfinder. Its 8 element 6 group optical lenses reproduce natural colors. The viewfinder is filled with nitrogen gas to prevent condensation and fogging. The eyepiece guard helps provide a clear view as it does not allow light to enter the viewfinder.

Features

  • Newly designed straight type viewfinder based on full frame DSLR.
  • High performance large prism and optimized glass material make it possible to see every corner of camera’s viewfinder image clearer and brighter. Unlike conventional viewfinders, this bright viewfinder enables you to focus precisely and comfortably even in dark underwater.
  • Optically designed to suit to an EVF: electrical viewfinder of a DSLR camera which provides wider viewing angle, so no vignetting nor blur even in corners.
  • Magnification of this viewfinder is same as camera’s viewfinder. As its eye-point underwater is extended to 60mm/2.4inch, no vignetting of viewfinder image even through a mask.
  • Viewfinder body is made from corrosion resistant aluminum and FRP: fiber reinforced plastic to make the body compact, lightweight yet durable.
  • Same mount system as existing INON viewfinder.

Diopter Correction Lens[+1.5D] for STVF-II  [Features]

  • Optional accessory for Straight Viewfinder Unit II for X-2
  • Add-on correction lens to shift +1.5 diopter for those who are unable to adjust with camera’s viewfinder diopter adjustment range due to long sight or presbyopia.
  • The Diopter Correction Lens has to be installed before diving by drop it inside of the Straight Viewfinder from housing side and tighten it by packaged tool
  • Size including the mount: (L)101.8mm/4.0in x (W)72.2mm/2.8in x (H)74.0mm/2.9in
  • Weight: 305g/10.8oz (air)
  • Depth rating: 75m/246ft
  • Material/finishing: Optical glass, corrosion resistant aluminum alloy, PC, POM etc.
  • Viewfinder STVF-II
  • Protective lens cap
  • Spare o-ring
Inon provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Inon´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Inon nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Inon accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Inon does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Inon Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will Inon, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Inon or ADITECH is advised of such damages.                                         
     

Do you have any doubts?