Overview & Features
Digital Lighting package for compact camera housings, it
comes with a PV10S video light, universal tray Ikelite 2605.04, clamp and arm
adapter.
Amazing new compact PV10S video & focus light. We have packed a lot of features in to a very compact
package this time around. To start we have a massive 1200 lumens of
white light to cover all of your macro lighting needs, this portable
video light offers two brightness levels for different diving
environment use. It has 70 degrees super wide floodlight with no blind
angle for underwater video and photography.
We have built in our patented mechanical push button
switch to turn the light on-off, and cycle through the modes.
Using a single, larger lithium cell creates a very compact light weight package. With this system the user does not have to worry about a sealed
lithium cell dieing in the middle of a trip! Also includes standard 25 mm ball
mount to attach to your arm system. This can be replaced with an
optional ball mount.
KEY FEATURES
-
High/Low Brightness - 1200/600 lumens
-
70 degree beam LED light
-
Stepples dimming from 100% to 10%
-
Long Burn Time, 75/150 min at the 1200/600 lumen setting
- Flicker-free firmware design
- LED low battery alarm, Green (> 70%), Yellow (<70%), Red (<30%)
- Integrated Battery and Lighting Head
- Superior water penetration and colour contrast
- Excellent Colour Rendition
- >50,000 hours average LED lifetime
- Patented mechanical push button
switch
- Removable battery pack for safe travel.
- Depth rated to 100 m (330 feet)
- Double O-Ring Sealed
- Wide range of mounting options
PRODUCT DETAILS
- The PV10S is designed to be used as
primary video lighting for any underwater video, digital still or digital
SLR system.
- A perfectly diffused 100 degree beam underwater provides
even coverage from macro to wide angle.
- Near daylight 5600º Kelvin colour temperature
ensures the most true, natural tones especially when combined with ambient
light in seascapes.
- The light head's powerful 1200 lumen beam may be
reduced to 600 lumen (50%) or steppless dimming from 100% to 10% to fine-tune exposure and extend
battery life.
- A compact and ergonomic design features a large
power switch on the back of the light.
- The heavy-duty and reliable mechanical switch is
within easy reach and features click-stops to indicate power setting by
feel.
- Equipped with LED low battery alarm that changes colour (green, yellow, and red) depending on battery capacity
- The PV10S has been designed and manufactured using high quality components to withstand harsh environments.
- The PV10S is equipped with a 25mm ball mount, the 1" (2.5cm) ball arm system is compatible with arm systems
from several manufacturers.
- Additional battery cells may be purchased
separately to quickly exchange for a fully charged pack and keep shooting.
Smart Charger Lithium Ion
- Ideal For Travel: Auto-ranging input allows the charger to work in any country whose electrical system falls within a 100V - 240V range.
AC adapters for the following regions are available: USA, Europe, United Kingdom, and Australia.
- Conditions Cells: The charger showcases the latest pulse charge technology; this feature
grants near complete charging while also conditioning cells over time,
resulting in longer battery life and more flashes per charge. Its
"trickle" charge mode helps maintain a
pack's charge without danger of overheating. In addition, this charger
is less likely to fail when
used with poorly regulated power sources.
Technical Specifications
PERFORMANCE
- Light Source: 1x CREE XP-L2 LED
- Light Colors: white
- Power consumption: 10 W
- Luminous Flux (Lumen): 1200/600 lm
- Beam angle: 70º
- Colour temperature: 6300º Kelvin
- Colour rendering index (CRI): 83
ELECTRICAL
- Quick Output levels (white): 100-50%
- Stepples dimming: 100-10%
- Switch: Patented mechanical push button
- Battery capacity indicator LED: green (> 70%), yellow (<70%), red (<30%)
- Powered by: 1x Li-ion rechargeable 18650 battery, 3000 mAh
- Burn time:
- @ 100%: 75 min
- @ 50%: 150 min
- Cycle life at 23ºC: after 800 cycles +/- 70% available capacity
- Charging time: 4-5 h
MECHANICAL
- Depth rating: 100m/330 feet
- Pressure
Testing: seal
integrity and operation validated
- Body Material: Aluminum head, and body
- Treatment: Hard-anodizing type III
- Output Window: 4mm clear PC
- Arm bracket: supplied with 25mm ball mount
- Dimensions:
- Diameter: ø 35/26 mm
- Length: 124 mm
- Weight: 168g (land) / 106g (water)
What´s Included
- Video light PV10S
- 1x 18250 Li-ion rechargeable battery (3000 mAh)
- Lanyard
- Light adapter with 25mm ball mount
- 2x Spare O-rings
- Battery charger
- Carry case
- User´s manual
- Tray Ikelite 2605.04
- Clamp C-BJ
- Adapter for rigid arm A-BJ-IK to handle
Warranty
Scubalamp provides a limited warranty to the original purchaser against
all defects in original workmanship and material under normal SCUBA use
and service as outlined in the owner's manual for
15 months from the date of purchase, with the following exceptions:
- Should your equipment prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from flooding
an O-ring sealed or water tight area will not be covered under warranty.
All O-ring sealed products undergo extensive factory pressure testing
before being shipped and delivered and are therefore guaranteed to be
sealed and functioning when shipped from the factory.
- All batteries and chargers are warranted by the original battery/charger manufacturer.
- Lithium Ion battery packs are warranted for 6 months.
- Aditech will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Scubalamp/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Aditech does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized
Scubalamp Dealer or Scubalamp Service Department will void the warranty.
- By purchasing this product you agree and understand that in no
event will Scubalamp/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if Scubalamp/ADITECH
is advised of such damages.
