Customer Support
+34 972 661 661
Price (inc. VAT)
€59.00
€101.00
Offer
-42%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€29.95
€62.00
Offer
-52%

Nauticam GX9 (for Panasonic Lumix GX9)

Manufacturer: Nauticam
Availability: Usually ships in 1-2 weeks, on request only, no refunds
Share

Adding to an already impressive Micro Four Thirds lineup, the Panasonic GX9 brings some new features to its predecessor the GX8. Similar to the GX8, the GX9 features a 20MP Four Thirds Sensor but has removed the OLPF for sharper imaging. The previous version's 4-axis in body stabilization has been upgraded to 5-axis as well. Of particular benefit to the underwater shooter is the addition of a built-in flash allowing for TTL triggering of supported external strobes via fiber-optic cable.

Price (exc. VAT) €1,278.51

Price (inc. VAT) €1,547.00

Shipping cost from €65.00
Calculate shipping cost

Add to Cart

An exceptional hybrid housing to complement an exceptional hybrid camera, NA-GX9 is designed from the ground up with both video and still photo shooters in mind. Incredible engineering, enabling fingertip control access, has made Nauticam famous.

The Nauticam NA-GX9 Underwater Housing (17716)

Nauticam has long supported the Panasonic MFT lineup and the NA-GX9 takes all that experience to produce the finest underwater housing for this latest upgrade to the GX lineup.

Pop-Up Flash Support

With the addition of a built-in or pop-up flash, the GX9 will allow for TTL control of supported external strobes via fiber optic cables. The housing features built-in Sea & Sea style plugs that can be used with our Universal Fiber Optic Cables. These wet connections mean no possibility of flooded strobe connections and less setup/breakdown time.

Electronic Viewfinder

To take full advantage of the GX9's updated 2.76 M-dot LCoS electronic viewfinder the NA-GX9 housing supports the mirrorless versions of the Nauticam Magnifying 45º and 180º viewfinders which are designed to be installed in less than a minute without tools.

Drop-In Design

There GX9 is securely attached to a camera tray via a knurbled thumb screw allowing for an easy tool-free installation. The tray slides into the housing and is locked in place to ensure proper control alignment. No controls on the housing need to be preset either making installation and removal a quick and easy process. The pop-up flash can be opened/closed from outside the housing.

Angled M16 Front Bulkhead

A specially angled M16 bulkhead at the front of the housing is designed with the video shooter in mind. This angled bulkhead can be fitted with a standard HDMI bulkhead without an extension to allow for the use of external monitors such as the SmallHD.

Wet-Mate Lenses

The NA-GX9 can take full advantage of the Nauticam WWL-1 and CMC/SMC wet-mate optics when used with supported lenses and ports. The WWL-1 delivers zoom-through 130º wide angle and the ability to focus on the lens' front element. The CMC/SMC lineup delivers a variety of mid-range to super macro.  

Flip-Adapter or Bayonet Mount

A variety of mounting options for wet-mate lenses are available. For the macro enthusiast single or double lens flip adapters are available allowing for fast switching between optics while underwater without the risk of misalignment or losing a lens out your BCD pocket when it's not in use.

Integrated Vacuum Check and Leak Detection System

The NA-GX9 comes equipped with Nauticam's signature Vacuum and Leak Detection system electronics pre-installed. With the addition of a Vacuum valve the system is ready to provide constant feedback on the watertightness of the system via a large multi-color LED on the rear of the housing.

Flexi/Easitray Compatability

The NA-GX9 is designed to be used without any additional handles or tray but is fully compatible with the Easitray and Flexitray systems. The housing ships with the necessary stainless steel stiffening brackets and trigger extension for use with the optional tray systems.

  • It is equipped with full-function push buttons.
  • Full-size screen.
  • N85 Interchangeable port system
  • 10 bar pressure tested
  • Closure system: double O-rings, locking latches.
  • Hard anodized aluminum body and port, acrylic back cover.
  • Overall size:(w/ handles and mounting balls)
    • Width: 19 mm
    • Height: 128 mm
    • Depth: 100 mm
  • Weight (housing body): 1.16 kg
  • Buoyancy (with camera): slightly negative in salt water
  • Housing NA-GX9
  • Spare main O-rings
  • Silicone O-ring grease
  • O-ring remover
  • CR2450 battery
  • Set of Allen keys
  • Padded travel bag
  • User´s Manual
Nauticam provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Nauticam´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Nauticam nor Aditech will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • NAUTICAM accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Nauticam does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Nauticam Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will Nauticam, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Nauticam or ADITECH is advised of such damages.

Do you have any doubts?