Overview & Features
The Isotta RX100 MKVI for the Sony RX100 Mark VI is an outstanding example of the next generation of high-end housings for compact cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use.
An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for Sony Cyber-shot RX100 Mark VI perfect handling by means of an adjustable strips. Easy access to all key main camera controls by means of clearly labelled laser-engraved longlasting buttons. An easy and quick release camera mounting plate allows the camera positioning; the back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting.
ONE HAND to OPEN/CLOSE
It's very easy to open and close Sony Cyber-shot RX100 Mark VI, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins; the camera is placed easily into the housing on a sliding tray that keeps the camera robustly in place. A lever locks the tray safely inside the housing. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.
PORT, CLOSE-UP AND WIDE-ANGLE LENSES
The housing is equipped with a square port which allows the user to make use of the full range of the built-in camera zoom. The port is made of high quality materials to ensure a perfect image quality. This flat port is mounted via a secure bayonet mount to the housing.
Alternatively, the standard compact port with M67 thread (1176) can also be used, enabling the use of other M67 accessories but limits the range of the camera zoom.
FLASH
The RX100 Mark VI own strobe can be used fitting an external diffuser on the port. For better performance with wide angle lenses, one or two external strobes can be connected by optical fiber using the adaptor included.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Sony Cyber-shot RX100 Mark VI with a line/strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom.
Technical Specifications
- 100 metres depth rating
- All Sony Cyber-shot RX100 Mark VI / RX100 Mark VII key main controls
- M16x1 hole for vacuum system or external monitor
- Easy one hand housing open/close
- Moisture sensor
- Double high precision and quality O-Ring seals
- Weight: 1060 gr (out water)
- Dimensions: 150 L x 140 P x 115 A (with port)
- Dimensions: 150 L x 90 P x 115 A (without port)
What´s Included
- Housing for Sony RX100 MKVI
- Lens cap
- Reserve O-Ring for housing door
- Silicone grease for O-ring
- Internal flash diffuser
- Detachable optical fiber adapter / Strobe Mask
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 2 years from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.