Overview & Features
Sea Frogs Flat Port FP-D127x104 port with bayonet coupling, compatible with SeaFrogs housings for Sony A6600, A7, A7II, A7RIII, A7SIII, A7RIV, A9. This lens port has an internal diameter of 91mm, and its viewport is made of optical glass.
These lenses can be used with the SF-FP-2870 flat port :
- Sony Vario-Tessar T* FE 16-35mm f/4 ZA OSS (manual zoom gear included, limited zoom)
- Sony Vario-Tessar T* FE 24-70mm f/4 ZA OSS (optional manual zoom gear, limited zoom)*
- Sony FE 24mm F1.4 GM (only in autofocus mode)
- Sony FE 28-70mm F3.5-5.6 OSS (manual zoom gear included)
- Sony FE 50mm F1.8 (only in autofocus mode)
- Sony FE 50mm F2.8 Macro (only in autofocus mode)
- Sony FE 55mm F1.8 ZA Carl Zeiss Sonnar T (only in autofocus mode)
- Sony FE 85mm F1.8 (only in autofocus mode)
Technical Specifications
- Depth Rating: 197' / 60 m
- Mount Type: Bayonet
- Body Material: polycarbonate
- Port Material: coated glass front element
- Dimensions:
- Interior Diameter: 91 mm
- Exterior Diameter: 127 mm
- Length: 104 mm
- Weight: 0.507 kg
What´s Included
- Flat Port SF-FP-2870
- Zoom gear ring for SEL-2870
- Rear port cap
- Spare O-Ring seal
- O-ring remover
- Lens cleanning tissue
Warranty
Sea Frogs provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 1 year from the date of purchase, with the following exceptions:
-
Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at Sea Frogs´s discretion, free of charge, excluding shipping and
handling charges.
-
Repairs made under this warranty will not extend the warranty period
-
This warranty is non-transferable and applies to the original purchaser only.
-
All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
-
Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
-
Sea Frogs nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
-
Sea Frogs accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
-
All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
-
Sea Frogs does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
-
This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
-
This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
-
This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
-
Modifications or repair by anyone other than an authorized Sea Frogs Dealer or ADITECH Service Department will void the warranty.
-
By purchasing this product you agree
and understand that in no event will Sea Frogs, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if Sea Frogs or ADITECH is advised of such damages.
