The 200DLM/A Underwater Housing is the perfect companion allowing use of the Olympus OM-D E-M10 Mark III and Mark IV mirrorless micro four-thirds cameras in or around the water for scuba, snorkeling, surf, pool, or any adventure.
Pre-dive Checks
There is no greater assurance than being able to see your camera
and o-ring seal through the back of the housing. Our signature
open-groove design suspends the rear o-ring in a natural position that
is easier to maintain and more reliable than forcing the o-ring into a
channel. Once the housing is closed you can see the o-ring form a solid,
waterproof seal.
We recommend adding the optional Vacuum Kit with
1/2" Valve # 47012 to pull a vacuum on the housing and check for leaks
prior to entering the water.
Construction
Our specially formulated ABS-PC blend housing is highly durable yet
significantly lighter than aluminum. The light color keeps your camera
cooler when shooting in warm, sunny environments.
Lens Support
Ikelite lens ports are the lightest on the market, yet robust and capable of standing up to rough surf.
We
support a wide variety of lenses. Most popular zoom lenses and select
focus rings can be engaged using simple gearing that puts adjustment
right at your fingertips. Zoom and focus gears differ depending on which
lens you are using.
Lens ports and zoom gears sold separately. Refer to the appropriate port chart for compatibility information.
Wi-FI Transfer
Use the camera's built-in Wi-Fi feature to download photos to
another device without removing the camera from the housing. The Wi-Fi
feature is only usable above water within close proximity to the
connected device.
Compatibility
Unless otherwise noted, this housing does not accommodate the use
of add-on grips, battery grips, eyepieces, LCD covers, or other
accessories. Differences in lens and control placement prevent other
camera models from being used in or adapted to this housing. We are not
aware of any other
models which may be used in or adapted to this housing.