Overview & Features
The Isotta CC-TG5 for the Olympus TG5 is an outstanding example of the next generation of high-end housings for compact cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use.
PRODUCT DETAILS
- Anti-corrosion anodized aluminum body.
- Slide for the rapid insertion and extraction of the camera.
- The front of the port is 52/67mm threaded for the attachment of optional accessories.
- Adapter for using flash with optical fiber.
- All controls are on the outside and the symbols are identical to those of internal controls.
- Buttons designed for use even with gloves on.
- Double o-ring seal on each button and on the back and on all removable parts.
- Machine stability is also guaranteed under the pressure of the buttons, thanks to four points of plastic support, placed inside the front of the shell.
- Red LED for indicating the presence of moisture inside the housing, with end-user replaceable battery.
- Isotecnic closure knob assembly cap and body.
- Large rear door allows a better view of the display.
- Accessory slide allows the use of different optional accessories
- 2 holes M6 allow to apply other accessories
- Depth rarting: 100 m.
OVERVIEW
An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The housing for Olympus Tough! TG-5 perfect handling by means of an adjustable strips. Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons. The back door has a large window for a fine camera display view and it is entirely detached from the front body to make easier the camera fitting.
ONE HAND TO OPEN/CLOSE
It’s very fast to open and close Olympus Tough! TG-5, without any efforts by the user thanks to the side helicoid screw and the bottom centered pins. The housing stands with great stability due to sturdy and wide rubber feet located on the bottom.
PORT, CLOSE-UP AND WIDE-ANGLE LENSES
The housing for Olympus Tough! TG-5 ends with a tempered glass optic and features a M67 and M52 thread mount that allows the use of additional wide angle lens and macro lens.
LIGHTING
The Olympus Tough! TG-5 own strobe lighting is enhanced thanks to a standard diffuser placed in the provided flash window. For better performance with wide angle lenses, one or two external strobes can be connected by optic fiber bushing.
CONSTRUCTION AND SAFETY
Only the best materials are used to manufacture our housings such anodized aluminum which is anticorodal and thermo-coated and stainless steel. A longlasting product that requires easy and simple maintenance by the user. So small and so rich in technology! Dual high precision and quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and / or removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth is 100 metres. An hole positioned on the bottom allows to secure the housing for Olympus Tough! TG-5 with a strap. Different accessories can be fitted by means of an upper sliding tray and double threaded M6 holes and one 1/4W on the bottom.
Technical Specifications
- Colors: Red anodized
- Material: Corrosion resistant aluminum alloy
- Manufacturing: CNC machining
- Dimensions:
- Width: 153,5 mm
- Height: 112 mm
- Length: 70 mm
- Weight: Approx. 830 g (without camera)
- Depth rating: 100 meters
What´s Included
- Housing for Olympus TG5
- Lens cap
- Reserve O-Ring for housing door
- Silicone grease for O-ring
- Internal flash diffuser
- Detachable optical fiber adapter / Strobe Mask
- User´s manual
Warranty
ISOTTA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for
2 years from the date of purchase, with the following exceptions:
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- ISOTTA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- ISOTTA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will ISOTTA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if ISOTTA or ADITECH is advised of such damages.
