Customer Support
+34 972 661 661
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)

Canon WP-DC56 (Canon G1X Mark III)

Manufacturer: Canon
Availability: Usually ships in 1 week
The WP-DC56 Waterproof housing from Canon enables you to shoot underwater with their PowerShot G1X Mark III Digital Camera. It features a depth rating of 40m/130'. Mechanical controls afford access to virtually all camera functions, and the built-in, flat polycarbonate port with anti-reflective coating accommodates the lens.

Price (exc. VAT) €379.34

Price (inc. VAT) €459.00

Shipping cost from €28.00
Calculate shipping cost

Add to Cart

The WP-DC53 Underwater Housing for Canon G1X MarK III. Explore a whole new world of underwater photography with the new WP-DC53 Underwater Housing. Compatible with the Canon G1x Mark II Digital Camera, this case provides water resistance to depths of 40 metres, as well as protecting the camera from dust, dirt and damage – making it perfect for snorkelling or scuba diving.

The Mark II's built-in, pop-up flash is also usable, and an included diffusion plate softens its light to eliminate backscatter, glare, and hard shadows in your images. Additionally, the case comes configured with a cold shoe mount for accessories, such as an optional lighting arm or an external flash in a separate housing, which can be connected via fiber-optic cable.

Product Highlights

  • Depth Rating: 130'
  • Clear Durable Plastic Polymer Body
  • Mechanical Controls
  • Access to Virtually All Camera Functions
  • Built-In Flat Polycarbonate Lens Port
  • Diffuser for Camera's Built-in Flash
  • Cold Shoe Mount
  • Neck and Wrist Strap Included


  • Housing molded of corrosion free clear polycarbonate, durable and resistance to corrosion, which is clear to enable you to monitor the waterproof seal and the camera
  • Clear view the camera information and control function
  • Large, easy to see buttons allow camera operation underwater, even with diving gloves
  • Ensures that camera stays clean and dry
  • Perfect in humid and wet conditions, salt spray, dust or snow, ideal for diving, surfing, snorkeling, skiing, yacht or other activities
  • Mechanical controls provide access to essentially all camera functions. The only limitation is that you have partial, and not full, access to the dual control rings. The control dial is usable, though the housing has a different method of activating it: Just move the zoom lever while pressing the DISP button.
  • Built-in, flat polycarbonate port with anti-reflective coating accommodates the camera's lens
  • O-ring sealed with spring-loaded
  • Easy open latch and drop in camera loading make set-up a breeze.
  • 1/4″ tripod screw on the bottom
  • Camera's Built-in Flash: An included flash diffuser improves lighting quality when the camera's built-in flash is used. A built-in flash is effective between 1-3 feet (0.3-0.9m) from the subject in clear conditions. For best results an external underwater strobe is recommended.
  • Additionally, the case comes configured with a cold shoe mount for accessories, such as an optional lighting arm or an external flash in a separate housing. An external flash can be connected via fiber-optic cable, which is available separately. An attachment that positions the cable in front of the Mark II's flash is supplied.
  • External Color Filters: Color filters replace some of the reds, oranges and more natural tones that would otherwise be lost underwater. Effective in relatively shallow, sunny conditions. Available as CF-CN for tropical blue water and CF-CN-M for use in green water settings.
  • A neck strap and wrist strap are included, as is a container of silicone grease for O-ring lubrication, which is necessary to maintain the housing's waterproof seal.
  • Waterproof to 40 Metres Depth
  • Working temperature: 0℃  to 40℃(32°F to 104°F)
  • Controls: All camera functions 
  • Material: polycarbonate, ABS plastic,clear plate glass,stainless steel, EPDM rubber
  • Width:5.9 in (150 mm) including controls
  • Height: 4.37 in (111 mm) including controls
  • Depth: 4.52 in (115 mm) including controls
  • Weight: 0.88 lb (400 g)
  • Buoyancy: Near neutral in freshwater
  • Depth Rating: 130 ft (40 m)
  • Built-in Flash: Yes
  • Strobe Connection: Slave
  • Tray Mounting: NC1/4" thread
  • Port Outer Diameter: NA
  • Blue Water: FilterCN-CF for WP-D52
  • Green Water Filter: CN-CF-M for WP-D52
  • Use 46mm Lenses: No
  • Use 67mm Lenses: Yes, with adapter AR-CN-m67
  • Use Bayonet Lenses: No
  • Housing Canon WP-DC56
  • Nylon landyard
  • Neck strap
  • Flash diffuser
  • Lubricant Grease
  • User´s Manual
CANON provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions and conditions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at CANON´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • CANON will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • CANON accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • CANON does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized CANON Dealer or ADITECH Service Department will void the warranty.
  • Each product is carefully examined and checked before it is shipped. It should therefore be visually and operationally checked as soon as it is received. If it is damaged in anyway, a claim should be filed with the courier and ADITECH notified of the damage.
  • By purchasing this product you agree and understand that in no event will CANON, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ADITECH is advised of such damages.

NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is caused by misuse, repair will be billed to the customer, and an estimate submitted for customer approval before the commencement of repairs

Do you have any doubts?