Customer Support
+34 972 661 661
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%

Isotta CC-ZCAME1 (for Z CAM E1)

Manufacturer: Isotecnic
Availability: please, contact us
Share

With Isotta housing for Z CAM™ E1 you can now shoot underwater with the world’s smallest 4K ultra-high definition camera with an interchangeable lens system. Thanks to the compact housing design it’s easy to shoot and get a great image quality. With double O-Rings on every mobile and removable part, ensuring an excellent watertight seal until 100 metres.

Price (exc. VAT) €619.83

Price (inc. VAT) €750.00

Shipping cost from €28.00
Calculate shipping cost

Add to Cart

With Isotta housing for Z CAM™ E1 you can now shoot underwater with the world’s smallest 4K ultra-high definition camera with an interchangeable lens system. Thanks to the compact housing design it’s easy to shoot and get a great image quality. With double O-Rings on every mobile and removable part, ensuring an excellent watertight seal until 100 metres.
Easy access to all key/main camera controls even with gloves by means of clearly labelled laser-engraved longlasting buttons and thanks to the front lever and lateral one and to the shutter knob. On the upper side of the housing a window allows the view of the camera OLED display which gives information on the battery level, the resolution, the ISO level and the activated connections. The back door has a large window glass and thanks to the space allowed for the LCD display it is possible to clearly see images on the screen, making composing and monitoring shots easy. 

CONTROLS

  • Power (On/Off) button of Z CAM™ E1
  • Shutter/Record button
  • Lens release button
  • Mode button
  • OK/Custom functions button
  • Up/Focus button
  • Down/Photograph button
  • MENU/delete button
  • Depth rating: 330 feet/100 meters
  • Precision machined from a single aluminum block. Fully anodized
  • All function labels are pad printed to prevent peeling off or fading.
  • Accurate ergonomic design and excellent underwater balance - all controls including the video activating controls are within easy reach.
  • Finishing: Anodized coating after barrel sanding.
  • Camera installation: Saddle-way.
  • Construction:
    • Housing body: Anodized aluminum alloy
    • Display window: Abrasion resistant polycarbonate
  • Dimensions:
    • Width: 126 mm
    • Height: 94 mm
    • Thickness: 106 mm
  • Weight: Approx. 0.460 kg (without camera)
  • Depth rating: 100 metres
  • Controls:
    • Power (On/Off) button of Z CAM™ E1;
    • Shutter/Record button
    • Lens release button
    • Mode button
    • OK/Custom functions button
    • Up/Focus button
    • Down/Photograph button
    • MENU/delete button
  • Housing CC-ZCAME1
  • Spare O-Ring for Housing
  • Container of O-ring lubricant
  • User´s manual
ISOTTA provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 2 years from the date of purchase, with the following exceptions:
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • ISOTTA nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • ISOTTA accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Nauticam does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will ISOTTA, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ISOTTA or ADITECH is advised of such damages.

Do you have any doubts?