Customer Support
+34 972 661 661
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)
Price (inc. VAT)

Nauticam NA-LX10 Pro Package (for DMC-LX10/LX15)

Manufacturer: Nauticam
Availability: Usually ships in 2-3 weeks, on request only, no refunds

The NA-LX10 housing is built for DMC-LX10 (known as DMC-LX15 in the UK), the ultimate compact, high-performing digital camera valued by both professional and enthusiast photographers, depth rated to 100 meter (330ft).

Price (exc. VAT) €1,138.02

Price (inc. VAT) €1,377.00

Shipping cost from €58.00
Calculate shipping cost

Add to Cart


Nauticam first “supported” the LX series with the LX5 in early 2011, recognizing the image quality and capabilities of this compact system. The housing for the LX7 followed suit in 2013. The NA-LX10 benefits from this lineage, and is the most refined of the LX housings to date. This is a compact underwater housing designed to allow the user to harness the full potential of advanced compact camera in water.

All of the basic functions and ergonomic enhancements that Nauticam users have grown to know and love are incorporated in NA-LX10. The housing is machined from a solid block of aluminum, then hard anodized to seal out corrosive salt water. It is closed via a simple, yet secure locking rotary latch. The right side of the housing is sculpted to fit the palm of the user’s hand, and Nauticam’s two-stage shutter release lever provides clear differentiation between the half press and full press shutter release positions. All functions are clearly labeled, and an m14 accessory socket allows an optional vacuum valve to be installed.

The LX10 camera presents some unique challenges to the housing designer – the aperture ring, aspect ratio dial, and on/off switch, in particular. Although this necessitates pre-setting these three controls when inserting or removing the camera, this housing does provide the user complete and very ergonomic control over these vital functions, even going so far as to label the stops/positions for all three controls.

The zoom lever is placed for easy access allowing the video maker smooth zooms. A locking ring prevents over zoom when using the short port.
This housing also includes handle brackets and a shutter release extension for use with the provided Flexitray, providing additional stability – important when shooting high resolution video. The PRO Package also includes a right handle for the tray in addition to two 1" standard mounting balls for the handles.

The Nauticam leak alarm and vacuum monitoring system is installed as standard equipment. This system provides an audible and visual alert to any water entry in the housing. This PRO package includes the accessory M14 Vacuum Valve (#25624). The water tight integrity of the system can be tested before ever entering the water and monitored during every dive.

Rotary locking latch

An oversized rotary latch seals the housing, and securely locks in place without risk of accidental opening.  No control functions need to be preset or aligned when installing the camera, it simply drops into the housing and is ready to use.

Flexitray and ball mounts

The PRO package version of the NA-LX10 includes a Flexitray complete with the optional right handle and two ball mounts.

Stiffening brackets and shutter extension

As the PRO package comes with the Flexitray it also ships with the stainless steel stiffening handle brackets to ensure wobble-free operation even with large lights or strobes attached as well as the shutter release extension.

Vacuum check and leak detection system

Although all housings ship with the electronics for the Vacuum check system the PRO package already includes the vacuum system bulkhead as well.
  • Tiny, lightweight housing
  • Full access to all controls
  • 100 meter (330ft) depth rating, made out of solid aluminum
  • All buttons clearly labeled, very easy to use & access
  • Port is 67mm threaded, for easy attachement of the Nauticam wide angle lens NA-38103 and Inon Macro lens UCL-165/330
  • Supports connecting fiber optic cables, S&S style and bare cables
  • Top of the housing has a cold-shoe mount, and an M10 screw for a ball mount
  • Colors: Black anodized
  • Material: Corrosion resistant aluminum alloy, POM resin etc. 
  • Weight :
    • Dry weight approx. 840 g (1.8 lbs) 
    • Underwater weight apporx. 180 g (7.2 oz)
  • Size:  170mm (W) x 116 mm (H) x 102 mm (T)
  • Optional accessories:
    • Internal flash diffuser (optional)
    • Red and Magenta filter
    • Wet mount Macro lens
    • Wet mount Wide angle converter
    • Housing tray with handle
  • Housing NA-LX10 with M67 lens port
  • 1 Flexitray
  • 1 Right handle
  • 2 Mounting balls
  • 1 M14 vacuum valve
  • 1 Shutter release extension
  • 1 Spare silicone rubber O-Ring for Housing
  • 1 O-ring remover
  • 1 O-Ring Grease
  • 2 Optical fiber adapter plug
  • 1 Set Hexagonal Allen keys (6/5/4/3/2.5/1.5 mm)
  • 1 Port cap
  • 1 CR2032 battery
  • 1 English user´s manual
NAUTICAM provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Nauticam´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • NAUTICAM nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • NAUTICAM accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Nauticam does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized NAUTICAM Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will NAUTICAM, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if NAUTICAM or ADITECH is advised of such damages.

Do you have any doubts?