| Acoustic Frequency | 200 kHz / 450 KHz |
| Beam width | 10° / 5° Conical (-3dB) |
| Transmit Pulse Width | 10µsec ~ 200µsec |
| Transmit Power | Max. 50 W ( adjustable) |
| TVG Control | Up to 60 dB |
| Gain Control | -30 dB to +30 dB |
| Input Signal Attenuator (-20dB) | Activation time 0~300,000 µSec |
| Ranges | 0.5 m ~ 200 m (200kHz), 0.15 m ~ 100 m (450kHz) |
| Repetition (Ping) Rate | 100 Hz max |
| Sampling Rate (Profiling mode) | Max 100kHz; adjustable, or auto mode (default) |
| Water Column Resolution | Appx. 7.5 mm @100kHz sampling |
| Altimeter Range Resolution | 1.0 mm |
| Temperature sensor Resolution | 0.1°C |
| Tilt sensor integrated | Dual-axis (Roll & Pitch) ±90° , Inclination data resolution 0.1° |
| Synchronization | Outward / Inward (S/W selectable) - ECT D24U & ECS D24U |
| Analog Output Interface | 1.25V, 2.5V, 5V, 10V max (S/W selectable) , Distance or Envelope |
| Digital Output Interface | USB 2.0 |
| Communication Speed | 4800 ~ 921600, 3M baud (115200 baud default) |
| Data Output Format | Profile 10bit/12bit resolution ASCII Text , Profile 12bit resolution Binary , Profile 8bit resolution Binary (12bit compressed to 8bit) , Altitude NMEA0183 / Altitude Simple |
| Configuration and Data reading | Echologger Control Program or any Terminal program |
| Connector | LTW 12-05PMMS-SH8003 & 5m USB 2.0 Cable |
| Power supply | USB Powered, 2W max |
| Operation Temperature | -10°C +50°C |
| Operating Depth | Standard 1m, 100m (up to 6000m) |
| Housing | Acetal (1m) IP68 |
| Dimensions (100m rate) | D56 mm x L80 mm (without connector) |
| Weight (100m rate) | 430g |
| * | *Same specifications applied to ECT D24U / ECT D24U |
Select your country and region to calculate shipping cost
