Customer Support
+34 972 661 661
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€49.00
€69.00
Offer
-29%
Price (inc. VAT)
€452.00
€574.00
Offer
-21%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€699.00
€804.00
Offer
-13%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%

Meikon MK-XA1 (Fujifilm X-A1)

Manufacturer: Meikon
Availability: Usually ships in 1-2 weeks, on request only, no refunds
Share
The waterproof case Meikon MK-XA1 is specially designed for Fujifilm X-A1 with the 16-50mm lens. It allows your Fuji XA1  camera shooting underwater down to 40 meters (130 feet) to discover the world of the underwater. With this special design case, every key of the Fuji can be pressed to control freely as you want.

Price (exc. VAT) €274.38

Price (inc. VAT) €332.00

Shipping cost from €42.00
Calculate shipping cost

Add to Cart

Meikon Underwater Housing for Fujifilm X-A1 with the 16-50mm lens. Explore a whole new world of underwater photography with the new MK-XA1 Underwater Housing, this case provides water resistance to depths of 40 metres, as well as protecting the camera from dust, dirt and damage – making it perfect for snorkelling or scuba diving.

Meikon underwater camera housings are designed for those who are into underwater photography/videography. Just insert your digital camera in Meikon UW case and you will be able to take beautiful pictures at depth up to 40 meters/130 feet. Meikon products are reliable, as they are made out of high quality materials. Each housing is tested individually to prevent any accidents. Meikon provides excellent quality for a reasonable price.

MAIN FEATURES  

  • Housing molded of corrosion free clear polycarbonate, durable and resistance to corrosion
  • The housing is rated to 40m/130ft depth, and is rugged and ready for use!
  • Ergonomic design
  • Clear view the camera information and control function
  • Ensures that camera stays clean and dry
  • Perfect in humid and wet conditions, salt spray, dust or snow, ideal for diving, surfing, snorkeling, skiing, yacht or other activities
  • Provides mechanical controls for all camera functions
  • Each control on the housing is clearly labeled, making it easy to learn the system
  • Dedicated video control button for easy video filming in any shooting mode
  • Large, easy to see buttons allow camera operation underwater, even with diving gloves
  • Dual Fiber optical direct plug-in
  • Special mount for lighting accessories
  • Easy and secure installation of camera
  • O-ring sealed with spring-loaded
  • Easy open latch and drop in camera loading make set-up a breeze.
  • For tripod use, the housing features three standard 1/4" 20 tripod holes.
  • The Meikon housing is offered as standard equipment with a built-in leak detector that will immediately activate a loud buzzer and a LED located at the rear of the housing in the event water should find its way past the o-ring seals, the water detector is located next to O-ring sealing and at the lowest point (in usual operating position) of the case
  • Compatible with a wide range of underwater photo accessories

OVERVIEW

The Meikon MK-XA1 is a black PC waterproof case for the Fujifilm X-A1 camera. The case is depth rated to 130' (40 m). It features a Camera Quick Shoe for easy mounting and removal of the camera. There are 2 fiber-optic cable sockets. When you connect the fiber-optic cable to the connector, the light of the digital camera's built-in flash is detected and connected to an external strobe to improve lighting quality. 

Its easily-operated shutter lever is excellent for taking quick snapshots. Push from the top or pull from the front to operate the lever. There's a smooth halfway press for adjusting the autofocus, so you need not worry about any missed chances. 
  • Materials:
    • Polycarbonate
    • ABS plastic
    • Clear plate glass
    • Stainless steel
    • EPDM rubber
  • O'ring sealed buttons with spring loaded mechanism to protect your camera properly
  • All function labels are pad printed to prevent peeling off or fading.
  • Accurate ergonomic design and excellent underwater balance
  • Synchro socket: 2 optical sync socket are built-in.
  • Dimensions: 
    • Width: 200 mm
    • Height: 180 mm
    • Depth: 190 mm
  • Weight: Approx. 0.6 kg (without camera)
  • Depth rating: 130 feet/40 meters
  • Waterproof Case MK-XA1
  • Nylon landyard
  • Neck strap
  • Lens cleanning tissue
  • User´s Manual
Meikon provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions and conditions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Advanced Diving Technologies´ discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Meikon/ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Meikon/ADITECH accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Meikon/ADITECH does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
  • Each product is carefully examined and checked before it is shipped. It should therefore be visually and operationally checked as soon as it is received. If it is damaged in anyway, a claim should be filed with the courier and ADITECH notified of the damage.
  • By purchasing this product you agree and understand that in no event will Meikon/ADITECH, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ADITECH is advised of such damages.

NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is caused by misuse, repair will be billed to the customer, and an estimate submitted for customer approval before the commencement of repairs


Do you have any doubts?