Customer Support
+34 972 661 661
Price (inc. VAT)
€49.00
€69.00
Offer
-29%
Price (inc. VAT)
€699.00
€804.00
Offer
-13%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€452.00
€574.00
Offer
-21%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%

Sea Frogs SF-XPro2 (for Fujifilm X-Pro2)

Manufacturer: Sea Frogs
Availability: Usually ships in 2-3 weeks, on request only, no refunds
Share
The waterproof case Sea Frogs SF-XPro2 is specially designed for Fujifilm X-Pro2. It allows your Fuji XT-10 camera shooting underwater down to 40 meters (130 feet) to discover the world of the underwater.
Options

Price (exc. VAT) €262.81

Price (inc. VAT) €318.00

Shipping cost from €42.00
Calculate shipping cost

Add to Cart

Sea Frogs Housing MK-XPro2 for Fujifilm X-Pro2

Sea Frogs Underwater Housing MK-XPro2 for Fujifilm X-Pro2. Explore a whole new world of underwater photography with the new SF-XPro2 Underwater Housing, this case provides water resistance to depths of 40 metres, as well as protecting the camera from dust, dirt and damage – making it perfect for snorkelling or scuba diving.

Sea Frogs underwater camera housings are designed for those who are into underwater photography/videography. Just insert your digital camera in Sea Frtogs UW case and you will be able to take beautiful pictures at depth up to 40 meters/130 feet. Sea Frogs products are reliable, as they are made out of high quality materials. Each housing is tested individually to prevent any accidents. Sea Frogs provides excellent quality for a reasonable price.

This housing equipped with the flat port fits the following lenses:
  • Fujifilm XC 16-50mm F3.5-5.6 OIS II (manual zoom not available, autofocus only)
  • Fujifilm XF 35mm F2 R WR (autofocus only)
This housing equipped with the WA005-D dome port fits the following lenses:
  • Fujifilm XC 16-50mm F3.5-5.6 OIS II (manual zoom not available, autofocus only)
  • Fujinon XF 18-55mm F2.8-4 R LM OIS (manual zoom not available, autofocus only)
  • Fujifilm XF 23mm F2 R WR (autofocus only)
  • Fujifilm XF 35mm F2 R WR (autofocus only)

MAIN FEATURES  

  • Housing molded of corrosion free clear polycarbonate, durable and resistance to corrosion
  • The housing is rated to 40m/130ft depth, and is rugged and ready for use!
  • Ergonomic design
  • Clear view the camera information and control function
  • Ensures that camera stays clean and dry
  • Perfect in humid and wet conditions, salt spray, dust or snow, ideal for diving, surfing, snorkeling, skiing, yacht or other activities
  • Interchangeable port system
  • The front of the port accepts press-on color correcting filters and is 67mm threaded for the attachment of optional accessories
  • Provides mechanical controls for all camera functions except zoom
  • Each control on the housing is clearly labeled, making it easy to learn the system
  • Large, easy to see buttons allow camera operation underwater, even with diving gloves
  • Nikonos 3 pin bulkhead connector for external flash
  • Special mount for lighting accessories
  • Easy and secure installation of camera
  • O-ring sealed with spring-loaded
  • Easy open latch and drop in camera loading make set-up a breeze.
  • Red LED for indicating the presence of moisture inside the housing
  • For tripod use, the housing features three standard 1/4" 20 tripod holes.
  • Compatible with a wide range of underwater photo accessories
  • Materials:
    • Polycarbonate
    • ABS plastic
    • Clear plate glass
    • Stainless steel
    • EPDM rubber
  • O'ring sealed buttons with spring loaded mechanism to protect your camera properly
  • All function labels are pad printed to prevent peeling off or fading.
  • Accurate ergonomic design and excellent underwater balance
  • Synchro socket: Nikonos 3 pin bulkhead connector
  • Dimensions: 
    • Width: 160 mm
    • Height: 135 mm
    • Depth: 145 mm
  • Weight: Approx. 1012 g (without camera)
  • Depth rating: 130 feet/40 meters
  • Waterproof Case SF-XPro2
  • Nylon landyard
  • Neck strap
  • Lens cleanning tissue
  • User´s Manual
Meikon provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions and conditions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Advanced Diving Technologies´ discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Meikon/ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Meikon/ADITECH accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Meikon/ADITECH does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes bulbs, lenses, cords, wet connectors, O-rings, fuses or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
  • Each product is carefully examined and checked before it is shipped. It should therefore be visually and operationally checked as soon as it is received. If it is damaged in anyway, a claim should be filed with the courier and ADITECH notified of the damage.
  • By purchasing this product you agree and understand that in no event will Meikon/ADITECH, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ADITECH is advised of such damages.

NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is caused by misuse, repair will be billed to the customer, and an estimate submitted for customer approval before the commencement of repairs


Do you have any doubts?