Overview & Features
The Meikon MK-X100S Housing was specially created for the Fujifilm X100S/X100
digital camera. The Meikon MK-X100S Housing
is
manufactured to the highest professional standards of function, style
and durability. It is depth rated to 40m/130 feet and is fully
functional with ergonomically designed and labeled controls.
With this special design case, every key of
inside Fujifilm X100S can be pressed to control freely as you want.
The Meikon MK-X100S Housing is ideal for outdoor and
underwater
photography. Underwater photographers can dive or snorkel and capture
all the excitement of this fascinating world, while outdoor
photographers also have the option of capturing the action of activities
such as white water paddle sports, sailing, boating, surfing, fishing,
hunting, backpacking and camping. The Meikon MK-X100S housing is shock
resistant and protects the camera from water, sand, dust, frost and
other damaging elements.
The Meikon MK-X100S Housing was designed to
be compatible with a complete accessory system, enabling photographers
to enhance the quality of their images.
MAIN FEATURES
- Housing molded of corrosion free clear polycarbonate, durable and resistance to corrosion
- The housing is rated to 40m/130ft depth, and is rugged and ready for use!
- Ergonomic design
- Clear view the camera information and control function
- Ensures that camera stays clean and dry
- Perfect in humid and wet conditions, salt spray, dust or snow,
ideal for diving, surfing, snorkeling, skiing, yacht or other activities
- Provides mechanical controls for all camera functions
- Each control on the housing is clearly labeled, making it easy to learn the system
- Dedicated video control button for easy video filming in any shooting mode
- Large, easy to see buttons allow camera operation underwater, even with diving gloves
- Dual Fiber optical direct plug-in
- Special mount for lighting accessories
- Easy and secure installation of camera
- O-ring sealed with spring-loaded
- Easy open latch and drop in camera loading make set-up a breeze.
- For tripod use, the housing features three
standard 1/4" 20 tripod holes.
- The MK-X100S is offered as standard equipment with a leak detector that will
immediately activate a loud buzzer and a LED located at the rear of the
housing in the event water should find its way past the o-ring seals,
the water detector is located next to O-ring sealing and at the lowest
point (in usual operating position) of the case
- Color filters replace some of the
reds, oranges and more natural tones that would otherwise be lost
underwater. Effective in relatively shallow, sunny conditions. Available
as CF-M67 for tropical blue water and CF-M67-M for use in green water
settings.
- Compatible with a wide range of underwater photo accessories
Technical Specifications
- All function labels are pad printed to prevent peeling off or fading.
- Accurate ergonomic design and excellent
underwater balance
- Synchro socket: 2 optical sync socket are built-in.
- Finishing: black front body, transparent rear body
- Shockproof: 1 meter
- Construction:
- Housing body: Polycarbonate, ABS plastic, clear plate glass, Stainless steel, EPDM rubber
- Display window: Abrasion resistant polycarbonate
- Dimensions:
- Width: 160 mm
- Height: 115 mm
- Thickness: 130 mm
- Weight: Approx. 0.748 kg (without camera)
- Depth rating: 40m / 130ft
What´s Included
- Housing Meikon MK-X100S
- Nylon landyard
- Neck strap
- Spare O-ring
- Lens cap
- Lens cleanning tissue
- User´s Manual
Warranty
Meikon provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for 1 year from the date of purchase, with the following exceptions and conditions:
- Should your housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- Meikon/ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Meikon/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Meikon/ADITECH does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will Meikon/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
