Overview & Features
Sea Frogs Housing for Canon EOS 80D
Sea Frogs Underwater Housing for Canon EOS 80D. Explore a whole new world of underwater photography with the new SF-EOS80D Underwater Housing, this case provides water resistance to depths of 40 metres, as well as protecting the camera from dust, dirt and damage – making it perfect for snorkelling or scuba diving.
The Sea Frogs SF-EOS80D Housing is ideal for outdoor and
underwater
photography. Underwater photographers can dive or snorkel and capture
all the excitement of this fascinating world, while outdoor
photographers also have the option of capturing the action of activities
such as white water paddle sports, sailing, boating, surfing, fishing,
hunting, backpacking and camping. The SF-EOS80D housing is shock
resistant and protects the camera from water, sand, dust, frost and
other damaging elements.
The Sea Frogs SF-EOS80D Housing was designed to
be compatible with a complete accessory system, enabling photographers
to enhance the quality of their images.
This housing equipped with the short flat FP-D127x88 or the WA005-B (polycarbonate dome)/WA005-B-GL (optical glass dome) dome ports are compatible with the following lenses:
- Canon EF-S 18-55mm f/3.5-5.6 IS II (no zoom control)
- Canon EF-S 18-55mm f/3.5-5.6 IS STM (no zoom control)
This housing equipped with the long flat port
FP-D127x119 or the
WA005-F (polycarbonate dome)/
WA005-F-GL (optical glass dome) dome ports are compatible with the following lenses:
- Canon EF-S 18-135mm f/3.5-5.6 IS (no zoom control)
- Canon EF-S 18-135mm f/3.5-5.6 IS STM (no zoom control)
- Canon EF-S 18-135mm f/3.5-5.6 IS USM (no zoom control)
Main Features
-
Housing molded of corrosion free clear polycarbonate, durable and resistance to corrosion
- The housing is rated to 40m/130ft depth, and is rugged and ready for use!
-
Ergonomic design
-
Clear view the camera information and control function
-
Ensures that camera stays clean and dry
-
Perfect in humid and wet conditions, salt spray, dust or snow,
ideal for diving, surfing, snorkeling, skiing, yacht or other activities
-
Provides mechanical controls for all camera functions except zoom
- Each control on the housing is clearly labeled, making it easy to learn the system
-
Dedicated video control button for easy video filming in any shooting mode
- Large, easy to see buttons allow camera operation underwater, even with diving gloves
-
Dual Fiber optical direct plug-in
-
Special mount for lighting accessories
-
Easy and secure installation of camera
-
O-ring sealed with spring-loaded
-
Easy open latch and drop in camera loading make set-up a breeze.
- For tripod use, the housing features two
standard 1/4" 20 tripod holes.
-
This housing is offered as standard equipment with a leak detector that will
immediately activate a loud buzzer and a LED located at the rear of the
housing in the event water should find its way past the o-ring seals,
the water detector is located next to O-ring sealing and at the lowest
point (in usual operating position) of the case
-
Color filters replace some of the
reds, oranges and more natural tones that would otherwise be lost
underwater. Effective in relatively shallow, sunny conditions.
-
Compatible with a wide range of underwater photo accessories
Overview
The Sea Frogs SF-EOS80D is
a black PC waterproof case for the Canon EOS 80 DSLR
camera. The case is depth rated to 130' (40 m). It features a Camera
Quick Shoe for easy mounting and removal of the camera. There are 2
fiber-optic cable sockets. When you connect the fiber-optic cable to the connector, the light of the digital camera's built-in
flash is detected and connected to an external strobe to improve
lighting quality.
Construction: Black PC resin makes diving housing strong and durable
Control: Mechanical controls
Depth Rating: 195' (60 m)
Strobes: 2 fiber-optic cable sockets available for strobes: When you connect
fiber-optic cable (L-type) to connector, light of digital camera's
built-in flash is detected and connected to external strobe
Shutter Lever: Excellent
for taking quick snapshots; push from top or pull from front to
operate; smooth halfway press for adjusting autofocus so you need not
worry about any missed chances
Warranty
Meikon provides a limited warranty to the original
purchaser against all defects in original workmanship and material
under normal SCUBA use and service as outlined in the owner's manual
for
1 year from the date of purchase, with the following exceptions and conditions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be defective for any reason
(other than those listed in the limitations section below) it will be
repaired or replaced at Advanced Diving Technologies´ discretion, free
of charge, excluding shipping and handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason, that is caused from
flooding an O-ring sealed or water tight area will not be covered under
warranty. All O-ring sealed products undergo extensive factory pressure
testing before being shipped and delivered and are therefore guaranteed
to be sealed and functioning when shipped from the factory.
- Meikon/ADITECH will not be liable for any loss, damages, or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of the product.
- Meikon/ADITECH accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic discoloration of surfaces, powder
coating, or material stitching that is chipped, damaged, or unthreaded
through customer use is not covered in the warranty.
- Meikon/ADITECH does not warranty any product for aesthetic finishes.
Issues with surface finish that do not affect function of the product
are not covered under warranty.
- This warranty does not apply and may be rendered completely void
in the event of accidental damage, abuse, overcharging of battery,
flooding due to neglect, tampering, lack of care and maintenance,
improper storage, or unauthorized service.
- This warranty specifically excludes bulbs, lenses, cords, wet
connectors, O-rings, fuses or other conditions resulting from misuse and
negligence.
- This warranty becomes void if the Video Housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized Meikon Dealer or ADITECH Service Department will void the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
ADITECH notified of the damage.
- By purchasing this product you agree and understand that in no
event will Meikon/ADITECH, its distributors or retailers, be held liable for
any personal injuries resulting from its operation, or any other damage
whether direct, indirect, incidental or consequential, even if ADITECH
is advised of such damages.
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs