Overview & Features
Panoramic drop camera system with 360° review angle. The system consists of four horizontal TV cameras with built-in LEDs light placed in the main tight hull. Besides, the underwater module can be equipped with depthmeter and compass with data on screen overlay
The Panoramic DCam underwater drop camera system is a high-resolution, color or B/W waterproof camera, with standard or a wide view angle. It can be used for underwater pipeline inspection, search and rescue, sport fishing, treasure hunting or marine biology research.
Underwater camera module: contains aluminum waterproof cylindrical hull with holes for mounting clamp for horizontal position of the camera. The four horizontal CCD 1/3” color camera with built-in LEDs light locates at the side of the module. The electronic board is installed into main cylindrical hull. Hermetic waterproof connector is at the back roof of the hull together with hole for vertical cam position mounting clam.
Top side control/power unit: provides powering of underwater module and
transmission of video, contains the LEDs brightness controller and DVR
Cable: Basic length of the cable is 100 m, max 300m. It is used for power and video transmission.
KEY FEATURES
- Real time video feed sent
to the operator
- 4x 700TVL Color cameras
- 0 Lux Min
Illumination with LEDs On
- Low Power Consumption
- Optional depth sensor
- Depht rated to 300m/984 feet
- Heavy duty reel with
bearings and electrical slip ring for easy tether management
- No formal training required
- Designed for commercial
use in demanding underwater application
- Affordability, size and
functionality enhances sales and profitability
Additional equipment (can be installed upon request):
- Cable (up to 300 m)
- Power Inverter 12VDC/230VAC
- Integrated battery pack in control case
- Depth sensor with On-screen overlay
- Temperature & Depth data logger
- Conductivity & Temperature data logger
- Conductivity, Temperature & Depth data logger
- Integrated LYYN Hawk image enhancer
APPLICATIONS:
- Internal inspection of pipes
- Tank and well inspections
- Confined space inspections
- Drop Camera
- Underwater surveillance
- Wet weather surveillance
- Pre-dive inspections
- Operator visuals for monitoring equipment and machinery
Technical Specifications
CCTV CAMERA
- Qty. of cameras: 3x horizontal + 1x vertical
- Camera Model: Sony Super HAD 2 CCD
- Camera resolution: 700 TV Lines
- Image Sensor: 1/3" Interline Transfer CCD
- Mini Illumination: 0.3 lux (0.01 - b/w camera)
- Lens: 3.6 mm/F2.0
- Iris Control: Auto
- Focus: fix from 0,5m to ∞
- Field of View (FOV): 66º
- Maximum Operating depth: up to 400 m
- Dimensions:
- Lenght: 190 mm
- Diameter: ø 90 mm
- Weight in Air: 0. kg
TETHER
- Max. tether length: 300 m
- Cable diameter: 11 mm
- Breaking Strength: 90 kg
- Weight in Air: 4.3 kg/100 m
- Weight in Fresh Water: Negative, 1,4 kg/100m in the sea water
- Type: Ultra-thin flexible Kevlar Coax cable
- Max. Working Load: 30 kg
LIGHTING SYSTEM
- Light Source: White ultra-bright LEDs
- Qty of LEDs: 45
- Power: 3 Watt
- Luminous Flux: 150 lm
- Beam Angle: 105º
- Colour Temperature: 5600-6000º Kelvin
- Control: Variable intensity
NAVIGATION SYSTEM
- Sensors (optional): Depth
- On-screen overlay: Yes
- Depth Sensor Accuracy: 1% F.S.
SURFACE CONTROL UNIT
- Power supply: Single Phase 100-240 VAC, 60-50 Hz
- Recommended Input Voltage: 220 VAC
- Output Voltage: 14 VDC
- Maximum power output: 50 Watt
- Monitor: 15" LCD
- On-Screen Display: Yes
- DVR: 4 Channels DVR HDD
COMPLETE SYSTEM
- System Protection: Full system packed in two high-performance waterproof cases
- Weight (Top side control case): 15 kg
- Weight (Camera + 100m Cable w/ Manual winch case): 15 kg
What´s Included
- Panoramic Color Drop camera
- Tether, 100 m
- Manual winch with slip ring
- Topside control console/power supply unit 100-240VAC (waterproof case integrated)
- Monitor LCD-TFT 15"
- 4 Channels DVR HDD integrated in case
- 2 robust Waterproof cases
- Cable connectors set
- Spare parts
- Buoyancy weight set
- Maintenance tools
- User's manual
Warranty
INDEL-PARTNER warrants that at the time of shipment all
products shall be free from defects in material and workmanship and suitable
for the purpose specified in the product literature. Customer
acceptance will always be deemed to have occurred within 72 hours of delivery. Indel&Partner provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal commercial use and service as outlined in the owner's
manual for 2 years from the date of purchase, with the following exceptions and conditions:
- INDEL-PARTNER must be notified immediately (in writing) of
any suspected defect and if advised by INDEL-PARTNER, the equipment subject to
the defect shall be returned by the customer to INDEL-PARTNER , via a suitable
mode of transportation and shall be freight paid.
- Should your equipment prove to be
defective for any reason (other than those listed in the limitations
below) it will be repaired or replaced at Indel&Partner´s
discretion, free of charge, excluding shipping and
handling charges.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- This warranty does not cover rental use.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- Indel&Partner or ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- Indel&Partner accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Indel&Partner does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty does not apply and may
be rendered completely void if the equipment has not
been installed and commissioned in strict accordance with approved technical
standards and specifications and for the purpose that the system was designed.
- The
warranty does not apply to faults that have been caused by failure to follow
the recommended installation or maintenance procedures. Or faults resulting
from normal wear & tear, incorrect operation, fire, water ingress, lightning
damage or fluctuations in vehicles supply voltages, or from any other
circumstances that may arise after delivery that is outwith the control of
INDEL-PARTNER. (Note: The warranty does not apply in the event where a
defect has been caused by isolation incompatibilities.)
- This warranty specifically excludes propellers, tether, domes, cords, connectors, O-rings, or other conditions
resulting from misuse and negligence.
- The
warranty does not cover the transportation of personnel and per diem allowances
relating to any repair or replacement.
- Modifications or repair by anyone other than an
authorized Indel&Partner Dealer or ADITECH Service Department will void
the warranty.
- Each
product is carefully examined and checked before it is shipped. It should
therefore be visually and operationally checked as soon as it is received. If
it is damaged in anyway, a claim should be filed with the courier and
INDEL-PARTNER notified of the damage. If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
- By purchasing this product you agree
and understand that in no event will Indel&Partner, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if Indel&Partner or ADITECH is advised of such damages.
- The warranty does not
cover any direct, indirect, punitive, special consequential damages or any
damages whatsoever arising out of or connected with misuse of this product
NOTE: If the equipment is not covered by warranty, or if it is determined that the fault is
caused by misuse, repair will be billed to the customer, and an estimate
submitted for customer approval before the commencement of repairs
