Customer Support
+34 972 661 661
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%

Sea&Sea MDX-RX100III (for Sony RX100 III/IV/V)

Manufacturer: Sea&Sea
Availability: Usually ships in 2-3 weeks, on request only, no refunds
Share
The Sea&Sea MDX-RX100III for the Sony RX100 III/IV/V is an outstanding example of the next generation of high-end housings for compact cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use.

Price (exc. VAT) €943.80

Price (inc. VAT) €1,142.00

Shipping cost from €42.00
Calculate shipping cost

Add to Cart

The Sea&Sea MDX-RX100III for the Sony RX100 III/IV/V is an outstanding example of the next generation of high-end housings for compact cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use.

PRODUCT DETAILS

  • Accessory lenses or filters with M67 screw mount can be fitted on the port
  • The port is threaded so M67 Wide-angle Conversion Lens 0.6x can be mounted directly.
  • Angle of view increases from 24mm (35mm film camera equivalent/aspect ratio 3:2) to approximately 18mm when the M67 Wide-angle Conversion Lens 0.6x is mounted.
  • When the lens is used at its widest angle, vignetting (dimming) will occur in the corners of the image. Zoom in slightly to telephoto (approx. image angle of 30mm) to eliminate vignetting.
  • Two SA8 Fixed Ball Base mount locations built-in
  • By attaching SA8 Fixed Ball Base to the specially designated mounts, located on the top and the side of the housing, SA8 components can be mounted to the housing without needing a grip or tray. Mounting the SA8 Ball Base For Accessory shoe provides even more versatile lighting options. Additional strobe or modelling lights can be used.
  • LCD Monitor Hood with Lens can be fitted
  • The LCD Hood reduces reflections and provides a clear and complete view of the camera's LCD screen. (LCD Hood stopper included)
  • All camera functions can be operated underwater.
  • The large dial on the housing front connects to the camera's control ring and smoothly operates manual focus and other functions.  The multi-purpose control wheel on the camera's rear is operated by the multi-point controller on the back of the housing. All controls can easily be reached and operated with your right hand.
  • The camera's built-in flash can be activated and deactivated from the housing.
  • Equipped with two Fiber-Optic Cable sockets.
  • Optional Leak Sensor can be built into the housing. Its LED lamp is located in the LCD monitor window and alerts you to any water ingress. The sensor immediately alerts you to any water leakage when the super-bright LED lights up.
  • Equipped with two sacrificial zinc diodes (one on the front case and the second on the rear) to avoid electrolysis damage.
  • The camera can be mounted in the housing with SONY's accessory "AG-R2" grip attached, so allowing comfy, stable use on land when required.
  • Anti-slip rubber piece located on the upper right-hand rear case, helps hold the housing steady.
  • The housing is easily opened and locked with the rotary latch and hinge.
  • External strobe or light can be mounted by attaching an SA8 Tray & Grip2118 to the tripod socket on the bottom of the housing.
  • Depth rating of 100m/330ft makes the housing ideal for tech diving.
  • Colors: Corrosion-resistant aluminum alloy, galvanized (black)
  • Material: Corrosion resistant aluminum alloy
  • Manufacturing: CNC machining
  • Weight: Approx. 930g / 32.8 oz (housing only)
  • Dimensions (WxHxD): 147 x 103 x 127mm / 5.8 x 4.1 x 5.0 inches (including port)
  • Depth rating: 100m/328 feet
  • Housing MDX-RX100III
  • Port cap
  • Hand strap
  • Fiber-optic cable connector cap (x2)
  • Anti-reflective tape
  • Silicone grease
  • O-ring maintenance manual
  • O-ring remover
  • LCD Monitor Hood Locking Rubber (rubber x1, M3 screw x1)
  • Hex Wrench
  • Instruction manual
Sea&Sea provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:
  • Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at Sea&Sea´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • Sea&Sea nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • Sea&Sea accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Sea&Sea does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, batteries´ electrolyte spillage, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized Sea&Sea Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will Sea&Sea, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if Sea&Sea or ADITECH is advised of such damages.

Do you have any doubts?