This compact and lightweight housing provide full operation of the
camera up to depths of 200 feet (60m). Large, easy-to-reach controls are
provided for all camera functions including the front and rear dials.
Rear controls are marked with easy-to-see laser engraved symbols which
never fade or fall off.
A new, ultra sensitive shutter lever and front rubberized grip make
the system a pleasure to hold and shoot with or without an optional
tray and handle. The front-loading camera mounting system makes
installation and removal a breeze. The camera mounting plate allows
ready access to the battery and memory card, and features a standard
1/4-20 mounting point for attachment to a tripod topside.
Zoom and macro close-up
The glass lens port has been optimized for full use of the camera's zoom range.
The front of the lens port is 67mm threaded for the direct
attachment of external wide angle and macro lenses. This port is as
close to the camera's lens as possible for the best image quality and
minimal vignetting (dark shadows in the corners of the image) with
external wet lenses. Vignetting can be eliminated by cropping the photo
in post-production. The INON UWL-H100 exhibits the least vignetting and
best clarity with this model among popular wet lenses currently
available on the market.
Color correction and external lighting
Light is absorbed as it travels through even short distances
underwater, making colors appear dull or monochromatic. To preserve the
natural colors of your subject, it's important to stay within arm's
reach—no more than 3-4 feet (1m) away.
Additional color correction and clarity can be obtained by adding a
color filter or external light. The lens port of the housing accept our
3-inch diameter color filters, which are available for both tropical
blue water and green water settings. A color filter reduces the amount
of light that reaches the camera's sensor, so they are most effective in
sunny conditions up to approximately 80 feet (24m).
A flash or constant on light is necessary for close-up, night
dives, and deep depths. An external light also brings out more colors in
sunny conditions. External lights are typically not used in conjunction
with color filters, as the combination will result in tones that are
too red or too purple.
The location of the camera's flash in relation to the lens makes
it unusable for lighting your subject underwater. However, the camera's
flash may be used to trigger an external strobe. Two ports are provided
for the connection of up to two fiber optically triggered underwater
strobes.
Alternatively, a bright constant-on video light can be used. A
constant-on light is not as bright as a strobe flash. Constant-on lights
do provide added versatility because they can be used for focus assist
and for improved colors when shooting video.
Two 1/4-20 threaded mounting points are included on the bottom of
the housing for the attachment of a tray and handle system. Handles
provide improved ergonomics underwater and are the foundation for your
lighting mounts.
There is a simple rule that brighter is better underwater. A
high-quality lighting system can produce magazine quality results with
almost any compact camera system.
Durability and corrosion free performance
Our brand new ABS-PC blend provides strength and corrosion free
performance year after year with minimal maintenance. The specially
formulated color deflects the sun to keep your camera running cooler,
longer. Compared to black or clear housings, the light gray color
provides superior contrast for enhanced view of the camera, LCD screen,
and o-ring seal.
The unique rear seal design prevents accidental twisting or
stretching of the o-ring for simple and confident assembly. We have
eliminated the need for an o-ring groove or channel which can trap sand,
dirt, or debris. Two double-passivated stainless steel locking lid
snaps are simple to use and virtually unbreakable. The clear back
allows you to see the o-ring form a solid, watertight seal as it closes.
Ikelite products are designed, built and tested in the USA. We use
locally sourced, top-grade materials. Our housings are built by hand and
individually tested for fit and function. Every unit is water pressure
tested to 200 feet (60m). We back our products with over 50 years of
experience and the best reputation for service within the dive industry.
Camera compatibility
Differences in camera size and lens placement prevent the original
Canon PowerShot G7X from operating in this housing. For the same reason,
the housing for the Canon PowerShot G7X cannot be modified or adapted
to fit the newer Canon PowerShot G7X Mark II.
