Overview & Features
The Recsea RDH-PG7 housing is made for Panasonic Lumix DMC-G7, rated to a depth of 100m, the new RRDH-PG7
is a rugged aluminum housing that continues the Recsea tradition of
ergononomic controls and innovative thinking. The housing design
emphasizes a casual, user friendly appearance allowing logical and
comfortable controls of the camera. The housing body is machined from
graded aluminium and coated with corrosion resistant hard anodize.
Recsea Build Quality
Of course, the sort of quality and robustness that has become
synonymous with the Recsea name is present with this housing as well.
Milled from solid aluminum, the housing is depth rated at 100m and built
to last. Exceptional care is taken to reduce any possibility of
galvanic corrosion, and the housing is hard anodized to stay looking
great after years of use.
The Recsea brand is known for superior ergonomics in all their
underwater camera housings. The RDH-OMEM1 will only enhance that
reputation. Every control is well thought out. Every button, lever and
switch is considered not in terms of what is easier for the designer,
but what is best for the shooter.
The key shooting controls are all easily accessed with the right hand
with very little finger movement required. What's more, since virtually
all of the controls on this camera are programmable, the shooter can
customize exactly how the rig will respond to the touch. Shoot, change
aperture, shoot, change shutter speed, flip to video, change shutter
speed, start recording, change ISO - all easily accessible, and all
without long reaches that can cause blurry images, mis-framing and shaky
video.
FEATURES OF THIS HOUSING
-
Compact and durable, CNC precision machined corrosion-resistant aluminum housing.
-
Lightweight, ergonomically designed.
-
Housing Maximum Operating Depth (MOD) of 100 meters (328 feet).
-
Dual Housing Port to Lens Port O-ring system.
-
-
RECSEA original Secure-Latch locking system for easy opening and closing.
-
Quality silicone O-ring with wider Back Cover contact surface for added protection at greater depths.
-
Complete camera function control.
-
Wide variety of optional Lens Ports, Focus and Zoom Gears, and other supported options
Technical Specifications
- Compatible Camera: PANASONIC LUMIX DMC-G7
- Maximum Depth:100 meters (328 feet)
- Material:
- Main Body and Back Cover: Corrosion-resistant Aluminum Alloy, Anodized
- Lever, Buttons, Dials: POM, PC
- Flash and Monitor Window: Hard Coat Acrylic
- Screws, Springs, Shafts: Stainless Steel, Galvanized/SUS
- Diffuser: Polycarbonate (POM)
- Size (Housing): Dimensions: W172mm x D111.5mm x H141.5mm
- Weight:
- 1.328kg (Land / Housing only)
- 0.320kg (Freshwater / Housing w/Camera & Tray, 45mm Lens, Lens Port & Gear)
- Standard Color: Black Alumite
What´s Included
- RDH-PG7 Housing (w/ out port)
- Built-in Camera Fixing Plate
- Hand Strap
- Strobe Mask/External Strobe Connection Mount and Screws x2
- Housing Port Cover
- Reserve O-rings (1 Main Body and 1 Housing Port)
- O-ring Removal Pick
- O-ring Grease
Warranty
RECSEA provides a limited warranty to
the original purchaser against all defects in original workmanship and
material under normal SCUBA use and service as outlined in the owner's
manual for 1 year from the date of purchase, with the following exceptions:
- This warranty does not cover commercial or rental use.
- Should your housing prove to be
defective for any reason (other than those listed in the limitations
section below) it will be repaired or replaced at RECSEA´s discretion, free of charge, excluding shipping and
handling charges.
- Repairs made under this warranty will not extend the warranty period
- This warranty is non-transferable and applies to the original purchaser only.
- All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
- Any flood or damage, for any reason,
that is caused from flooding an O-ring sealed or water tight area will
not be covered under warranty. All O-ring sealed products undergo
extensive factory pressure testing before being shipped and delivered
and are therefore guaranteed to be sealed and functioning when shipped
from the factory.
- RECSEA nor ADITECH will not be liable for any
loss, damages, or expenses including incidental or consequential damages
directly or indirectly arising from the sale or use of the product.
- RECSEA accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning or
leakage of the housing.
- All paint finishing, cosmetic
discoloration of surfaces, powder coating, or material stitching that is
chipped, damaged, or unthreaded through customer use is not covered in
the warranty.
- Nauticam does not warranty any product
for aesthetic finishes. Issues with surface finish that do not affect
function of the product are not covered under warranty.
- This warranty does not apply and may
be rendered completely void in the event of accidental damage, abuse,
overcharging of battery, flooding due to neglect, tampering, lack of
care and maintenance, improper storage, or unauthorized service.
- This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions
resulting from misuse and negligence.
- This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
- Modifications or repair by anyone other than an authorized RECSEA Dealer or ADITECH Service Department will void the warranty.
- By purchasing this product you agree
and understand that in no event will RECSEA, its distributors or
retailers, be held liable for any personal injuries resulting from its
operation, or any other damage whether direct, indirect, incidental or
consequential, even if RECSEA or ADITECH is advised of such damages.
