Ikelite 5516.65 DLM 30mm Extension Ring buy dive

Ikelite 5516.65 DLM 30mm Extension Ring

Manufacturer: Ikelite

Availability: Usually ships in 1-2 weeks, on request only, no refunds

Ikelite 5516.65 Mirrorless 1.2-inch Lens Extension. Extends a Mirrorless Lens Port by 1.2 inches (30mm) for use with longer lenses.

Overview & Features
Technical Specifications
What´s Included
Compatible products
Warranty

Overview & Features

Ikelite 5516.65 Mirrorless 1.2-inch Lens Extension

Product description

Extends a Mirrorless Lens Port by 1.2 inches (30mm) for use with longer lenses.

Mirrorless port system

An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this system—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.

Technical Specifications

Acetyl body

What´s Included

Lens Extension 5516.65
Spare securing screws
Silicone lubricant 1cc tube

Warranty

IKELITE provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:

This warranty does not cover commercial or rental use.
Should your equipment prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at IKELITE´s discretion, free of charge, excluding shipping and handling charges.
Repairs made under this warranty will not extend the warranty period
This warranty is non-transferable and applies to the original purchaser only.
All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
IKELITE nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
IKELITE accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
IKELITE does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
This warranty specifically excludes lenses, cords, connectors, O-rings, or other conditions resulting from misuse and negligence.
This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
Modifications or repair by anyone other than an authorized IKELITE Dealer or ADITECH Service Department will void the warranty.
By purchasing this product you agree and understand that in no event will IKELITE, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if IKELITE or ADITECH is advised of such damages.