Customer Support
+34 972 661 661
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%

Isotta 5DMKIII (for Canon 5D Mark III)

Manufacturer: Isotecnic
Availability: please, contact us
Share
The Isotta housing 5DMKIII for the Canon 5D Mark III is made from carefully selected aircraft grade aluminum alloy and premium grade stainless steel. It is machined on the latest 5 axis computer assisted machines available, and is protected by anodizing it. While anodizing will protect the housing from the environment, it will fade and discolor if left exposed to the elements, and so for further protection.
Options

Price (exc. VAT) €2,231.41

Price (inc. VAT) €2,700.00

Shipping cost from €58.00
Calculate shipping cost

Add to Cart

Isota housing 5D Mark III

An easy to use, highly professional product has been created through techniques and innovations gained from years of experience. The perfect handling of the Canon EOS 5D Mark III housing is possible by means of adjustable handles crafted to match the human hand and make holding the camera very comfortable even throughout long dives.

Easy access to all key/main camera controls by means of clearly labelled laser-engraved longlasting buttons, even with gloves and drysuit gloves. An easy and quick release camera mounting plate allows the camera positioning and a lever locks the tray inside the housing. The back door has a large window anti-scratch glass for a fine camera display and optical viewfinder view and it is entirely detached from the front body to make easier the camera fitting. External viewfinders can be mounted, INON X-2 compatible.

ONE HAND OPEN/CLOSE

The housing for Canon EOS 5D Mark III is closed with Isotta’s single handed one-turn knob. It’s the only single latch closing mechanism in the DSLR housing market. It’s fast, simple and secure thanks to its double steel pins at the bottom on the housing.

PORTS AND EXTENSION RING

A series of ports and extension rings are available in dedicated section. The removable port is fitted thanks to markers and a bayonet 120 mm connection to the Canon EOS 5D Mark III. The interchangeable port bodies and extensions rings combine to allow the use of most of lenses on the market for maximum versatility and performance.

LIGHTING

The housing for Canon EOS 5D Mark III offers the possibility to use external strobes via two standard optical light ports as well as two Nikonos sync cord bulkheads. This allows for easy mounting of any strobe and lighting set up in manual mode.

CONSTRUCTION AND SAFETY

Only the best materials are used to manufacture our housings such anodized aluminum, which is anticorodal and thermo-coated, and stainless steel. A longlasting product that requires easy and simple maintenance by the user. Dual high-quality O-Ring seals protect and ensure a perfect and secure watertight for all movable and removable parts; a red alarm for humidity/water inside the housing is powered by a battery replaceable by the user. Working depth 100 metres. Different accessories can be fitted by means of M8 hole positioned on upper side of the housing and double threaded M6 holes located on housing bottom side.

  • Depth rating: 300 feet/90 meters (upgradeable on request to 425ft/130 meters)
  • Precision machined from a single aluminum block. Fully anodized
  • All function labels are pad printed to prevent peeling off or fading.
  • Accurate ergonomic design and excellent underwater balance - all controls including the video activating controls are within easy reach.
  • Optional Synchro socket: 1x or 2x Nikon 5-pin or S6 Subtronic type
  • Optional flash trigger, manual (non-TTL)
  • 2 optical sync socket are built-in
  • Finishing: Anodized coating after barrel sanding.
  • Camera installation: Saddle-way.
  • Handles: two ergonomic hand grips
  • Construction:
    • Housing body: Anodized aluminum alloy
    • Display window: Abrasion resistant polycarbonate
    • Grip handles: Polycarbonate and rubber
  • Dimensions:
    • Width: 230 mm
    • Height: 210 mm
    • Thickness: 140 mm
  • Weight: Approx. 2.9 kg (without camera)
  • Depth rating: 100 metres
  • Isotta 5DMKIII housing without port
  • Grips, (left and right hand)
  • Spare main O-ring
  • Container of O-ring lubricant
  • Owner manual
ISOTTA provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 2 years from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • ISOTTA nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • ISOTTA accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Nauticam does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will ISOTTA, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ISOTTA or ADITECH is advised of such damages.

Do you have any doubts?