Customer Support
+34 972 661 661
Price (inc. VAT)
€89.00
€249.00
Offer
-64%
Price (inc. VAT)
€29.95
€62.00
Offer
-52%
Price (inc. VAT)
€368.00
€498.00
Offer
-26%
Price (inc. VAT)
€125.00
€195.00
Offer
-36%
Price (inc. VAT)
€3,925.00
€5,375.00
Offer
-27%
Price (inc. VAT)
€69.95
€75.00
Offer
-7%
Price (inc. VAT)
€49.00
€65.00
Offer
-25%
Price (inc. VAT)
€25.00
€57.00
Offer
-56%
Price (inc. VAT)
€149.00
€199.00
Offer
-25%
Price (inc. VAT)
€59.00
€101.00
Offer
-42%

Isotta CC-S110 (Canon S110)

Manufacturer: Isotecnic
Availability: Usually ships in 1-2 weeks, on request only, no refunds
Share
The Isotta CC-S110 for the Canon S110 is an outstanding example of the next generation of high-end housings for compact cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use.

Price (exc. VAT) €644.63

Price (inc. VAT) €780.00

Shipping cost from €42.00
Calculate shipping cost

Add to Cart

The Isotta CC-S110 for the Canon S110 is an outstanding example of the next generation of high-end housings for compact cameras. With excellent fit and finish, rugged construction, and meticulous attention to detail, all in a user friendly sized package, this is a beautifully executed housing. Ergonomic command dials make this housing a joy to use.

MAIN FEATURES 

  • Anti-corrosion anodized aluminum body.
  • Slide for the rapid insertion and extraction of the camera.
  • Rectangular portholes with bayonet mount and secure with lock to prevent accidental opening, allows the use of flash in the water with the help of a supplied diffuser.
  • Front porthole completely removable to mount additional optical.
  • Adapter for using flash with optical fiber.
  • All controls are on the outside and the symbols are identical to those of internal controls.
  • Buttons designed for use even with gloves on.
  • Wheel for quick change of diaphragms on the outside.
  • Wheel for quick change of the times on the outside.
  • Double o-ring seal on each button, on the porthole, on the back and on all removable parts.
  • Machine stability is also guaranteed under the pressure of the buttons, thanks to four points of plastic support, placed inside the front of the shell.
  • Red LED for indicating the presence of moisture inside the housing, with end-user replaceable battery.
  • Isotecnic closure knob assembly cap and body.
  • Large rear door allows a better view of the display.
  • Accessory slide allows the use of different optional (eg SPOT-peak).
  • 3 holes offer the possibility to use a strap or a lower side, at will.
  • 2 holes M6 allow to apply other accessories (eg flash bracket).
  • Depth rating: 100 m / 328 feet
  • Colors: Red anodized
  • Material: Corrosion resistant aluminum alloy
  • Manufacturing: CNC machining
  • Weight : 770g
  • Size: W140 x D110 x H110 mm
  • Depth rating: 100m/328 feet
  • Housing for Canon S110
  • 1 Lens cap
  • 1 Hand Strap
  • 1 Reserve O-Ring for housing door
  • 1 Reserve O-Ring for flat port
  • 1 Silicone grease for O-ring
  • 1 Internal flash diffuser
  • 1 Detachable optical fiber adapter / Strobe Mask
ISOTTA provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 2 years from the date of purchase, with the following exceptions:
  • This warranty does not cover commercial or rental use.
  • Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at ISOTTA´s discretion, free of charge, excluding shipping and handling charges.
  • Repairs made under this warranty will not extend the warranty period
  • This warranty is non-transferable and applies to the original purchaser only.
  • All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
  • Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
  • ISOTTA nor ADITECH will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
  • ISOTTA accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
  • All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
  • Nauticam does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
  • This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
  • This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
  • This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
  • Modifications or repair by anyone other than an authorized ISOTTA Dealer or ADITECH Service Department will void the warranty.
  • By purchasing this product you agree and understand that in no event will ISOTTA, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if ISOTTA or ADITECH is advised of such damages.

Do you have any doubts?