10Bar HS-DC-Pn-LX5 (Panasonic LX5 & Leica LUX5) buy dive

10Bar HS-DC-Pn-LX5 (Panasonic LX5 & Leica LUX5)

Manufacturer: 10Bar

Availability: Usually ships in 2-3 weeks, on request only, no refunds

Options

Overview & Features
Technical Specifications
What´s Included
Compatible products
Warranty

Overview & Features

Professional alumimium housing with the utmost high-tech compatible with Panasonic Lumix DMC-LX5 and Leica D-LUX 5. It is equipped with full-function control buttons. The Acrylic back cover allows taking pictures and checking on the camera much easier. Its key hole lock design provides ease of use and added security to prevent from leaking. Now you can use small cameras with the feeling and function of professional camera housings. 10Bar's Lumix LX5 housing is ideal for those who favor small cameras and compact housings. It is recommended for use to 180 feet and is fully compatible with accessories for the housing of its predecessor, the LX3.

Main Features

This is a solid aluminum housing for the Lumix LX5 with an acrylic back allowing the user to see inside the housing during use.
Equipped with full-function control buttons, it has the feeling and function of professional camera housings.
Its trademark keyhole lock design provides ease of use and added security to prevent leaks and flooding.
Depth Rating: Recommended working pressure 60m/180 feet. Housing individually tested to 90m/300 feet.)
Closure Design: Double O-Rings/ key hole lock
Body Material: Aluminum, Arcylic
Overall Size: 134mm x 152 mm x 112mm
Total Weight of Housing: 920g
Buoyancy: Slightly negative in salt water

Technical Specifications

It is equipped with full-function push buttons.
Full-size screen.
M67 female thread at front port allows to use the correction filter CF-M67 as well as the Inon wide angle lens UWL-100 and the macro lenses UCL-165 and UCL-330.
10 bar pressure tested
Closure system: double O-rings, locking latches.
Hard anodized aluminum body and port, acrylic back cover.
Overal size: 130 x 80 x 60 mm (LxWxH)
Weight: 1044 g (housing only)
Buoyancy (with camera): slightly negative in salt water
Optional Accessories:

Dome port and extension adaptor
Red filter
Extension arm for strobe or video light
Macro and Wide Angle lens
Housing for FL50 Flash

What´s Included

Housing
Carrying bag
Spare main O-rings
Silicone O-ring grease
O-ring remover
Cleansing set

Warranty

10Bar provides a limited warranty to the original purchaser against all defects in original workmanship and material under normal SCUBA use and service as outlined in the owner's manual for 1 year from the date of purchase, with the following exceptions:

This warranty does not cover commercial or rental use.
Should your housing prove to be defective for any reason (other than those listed in the limitations section below) it will be repaired or replaced at 10Bar´s discretion, free of charge, excluding shipping and handling charges.
Repairs made under this warranty will not extend the warranty period
This warranty is non-transferable and applies to the original purchaser only.
All correspondence concerning this warranty must be accompanied by a copy of the original sales receipt.
Any flood or damage, for any reason, that is caused from flooding an O-ring sealed or water tight area will not be covered under warranty. All O-ring sealed products undergo extensive factory pressure testing before being shipped and delivered and are therefore guaranteed to be sealed and functioning when shipped from the factory.
10Bar nor Aditech will not be liable for any loss, damages, or expenses including incidental or consequential damages directly or indirectly arising from the sale or use of the product.
10Bar accepts no liability for any loss of captured images or the inability to capture images even if it is due to the malfunctioning or leakage of the housing.
All paint finishing, cosmetic discoloration of surfaces, powder coating, or material stitching that is chipped, damaged, or unthreaded through customer use is not covered in the warranty.
10Bar does not warranty any product for aesthetic finishes. Issues with surface finish that do not affect function of the product are not covered under warranty.
This warranty does not apply and may be rendered completely void in the event of accidental damage, abuse, overcharging of battery, flooding due to neglect, tampering, lack of care and maintenance, improper storage, or unauthorized service.
This warranty specifically excludes lenses, cords, HDMI connectors, O-rings, or other conditions resulting from misuse and negligence.
This warranty becomes void if the housing components are damaged by anything other than normal recreational diving use.
Modifications or repair by anyone other than an authorized 10Bar Dealer or ADITECH Service Department will void the warranty.
By purchasing this product you agree and understand that in no event will 10Bar, its distributors or retailers, be held liable for any personal injuries resulting from its operation, or any other damage whether direct, indirect, incidental or consequential, even if 10Bar or ADITECH is advised of such damages.