Overview & Features
The Mangrove Moisture Detector can be installed inside any housing featuring sufficient space for the alarm unit.
The Mangrove Moisture Detector is
very sensitive, so whenever moisture is detected by the sensor, the
moisture detector LED light begins flashing and a warning alarm starts
beeping, thereby alerting the user of a possible leak.
The Mangrove Moisture Detector includes an alarm unit and a moisture sensor unit, connected by a thin wire.
The
alarm unit is installed on any of the housing side panels using a
double-sided installation sticker, included in the package. Make sure
that your housing offers sufficient space for the alarm unit to be
installed (27x22x8 mm) without interfering with a proper watertight
seal.
The Moisture Sensor unit is installed just under the camera or camera tray inside the housing.
Operated by a 3V Lithium #CR1220 battery. A replaceable and non-rechargeable battery is included.
Important Notices
- All components should be handled carefully during installation.
- The Mangrove Moisture Detector assists with detecting moisture inside the
housing.
- Installation of the Mangrove Moisture Detector inside the
housing does not eliminate the user's responsibility of validating
housing watertight seal prior to and during the dive.
Technical Specifications
- The water detector is supplied with a 5mm red LED.
- The water sensor and PCB comes with a adhesive to easy mounting on the desire location.
- Operated by a 3V Lithium #CR1220 battery
- PCB dimensions 27x22x8 mm
- Weight: 14 g
